Adding tie-down rings

[aczlan]

Your stake pockets should be good tiedown points.
If there is a convenient place on the floor (good location to tie down with a heavy piece of frame under it), how about a set of these bolted to the frame: Amazon.com: Curt Manufacturing 83740 11000 Lb Capacity 1/2 In Forged D-Ring W/Mounting Bracket: CURT: Automotive

Aaron Z

 

[George2615]

I saw these on another thread. Great for those who have stake pockets and don't weld. Plus they are movable. 4 for $100. isn't a bad price.

Gator Made Trailer Parts (4) STAKE POCKET MOUNTED D-RINGS FOR EQUIPMENT / FLATBED TRAILERS Trailer Parts | POCKET MOUNT D-RINGS FOR GOOSENECK, EQUIPMENT, FLAT BED TRAILERS | gatormadeusa.com

 

[Xfaxman]

my smaller 5x10 trailer had those metal loops on the sides in a couple of places, but this 16' dble axle has nothing. it does have stake pockets, but I didn't think they'd be very strong anchor point... think i'll try those Chain Tie-Down items listed above, bcp; I use this to move my 2305 and/or Ranger sxs for service, mostly, so it'll be infrequent, but I wanted to be safe. the bed tie downs mentioned in hslogger's post was what I thought I'd do, they have a 5,000 lb rating. rethinking the plan. thanks for the input!

The stake pockets are a good anchor point.

Drop the hook in and bring it up and hook it on the top edge. That way it won't fall off if it gets loose.

 

[sld]

The rings I used had one grade 8 bolt thru wood and steel while the other was just thru wood. I don't see a problem at all.