Rotary Cutter anybody use a MX10

[Brown Dog]

Old thread revived lol

Any more MX10 owners out ther ?

I'm concerned with the 16,275rpm Slower Blade Speed.

The Land Pride RCF3610 is 17,100

I know we're not talking finishing mowers but faster speed leaves a much cleaner cut .

I sure wished the Bush Hog 3210 had the new flat deck top like the new 3308 :-(

 

[Brown Dog]

Pulled the Trigger today on MX10

0% for 24months was the nudge I needed

 

[corey9212]

I had an MX10 pull type and loved it, I found the pto was actually quite light (want to talk about heavy pto try lifting and connecting the pto on my 568 baler, lol) I pulled the MX10 with a 6125R in economy mode and thick 3' grass and it only bogged once or twice briefly. Cut quality was excellent and was a joy to use in the pasture.

 

[Brown Dog]

I studied the Bush Hog & Land Pride 10 footers hard & heavy.

Both are excellent cutters.

I sold my MX6 & liked the Domed Top DOUBLE Deck, the blade tip speed & tail wheel setup on the lift type MX10.

If it evr dries up, I'll put it to work.