Anybody using a backhoe attachment on their CUT?

   / Anybody using a backhoe attachment on their CUT? #121  
Most modern tractors are today (aluminum pressure die castings) .. they will still crack under undue stress, but so will cast iron for that matter.
I recently got an example of how fragile poor-quality cast iron can be. We have some garden benches that are badly weathered. Nearly identical (when they were new) to the photo below.

Years ago I had snagged one end of a bench getting too close with the mower and broke a foot off. Then bought some nickel rod and welded it back on. Recently when I went to move that bench, the rotten wood slats disintegrated and as I dropped the bench, the other foot on the welded end broke off. Ok, we have 3 more benches like this, its time to junk this one.

For an experiment I dropped the already-broken cast iron end onto an anvil (RR rail) on the shop floor. Sure enough it shattered into 2 pieces. A couple more drops and the debris was small enough to put in the wastebasket. (Bad) cast iron is brittle!

wrought-iron-patio-bench.jpg
 
   / Anybody using a backhoe attachment on their CUT? #122  
I have the Yanmar YT235C with the Yanmar B75 backhoe with thumb
I just had to replace about 18 feet of sewer pipe roots sure glad that
I have it. The thumb is great for removing rocks sure saves on the back. Only thing I don't like is replacing the quick hitch on after taking
the backhoe off.

willy
 

Tractor & Equipment Auctions

Sema Pin Hitch (A45336)
Sema Pin Hitch...
2017 Skyjack SJ1056TH 10,000lb 4x4 Rough Terrain Telehandler (A45336)
2017 Skyjack...
132917 (A44391)
132917 (A44391)
PALLET OF (5) FLOOD LIGHTS (A47001)
PALLET OF (5)...
ALLISON TRANSMISSION (A47001)
ALLISON...
(INOPERABLE) ALLMAND LIGHT TOWER (A47001)
(INOPERABLE)...
 
Top