Anyone have a 17 super duty?

[ovrszd]

Pictures make it look worse than it was. Going to try to back on the shredder first next time. That's about 37-38k gross. Truck is rated to pull 32,500 trailer, 14k truck a 30k trailer



Exactly. Had plenty of pin weight for safety. Just the empty trailer with the compressor sits it downs but. The truck was just sitting on the overloads.



Truck handled and drove great. Probably the smoothest drive since I've had it. It's an F-450 so I don't know how much bigger people think I should go?? No middle fingers on the run home, just thumbs up

Brett

Brett, I think it looked fine. Those who have never been around a "heavy duty" truck might not understand. Sometimes I end up with a lot of pin weight that squats my truck. But it always drives good. I think Ford has nailed that part!!!

 

[jack707]

You would be very surprised. About $450 port to port. Getting it licensed and insured in the states is whole different ball game.

450 is not bad and Brazil is not around the corner.

 

[BrokeFarmerJohn]

I guess I should have said looks like a good size load there with a good amount of I would say tongue weight but I guess the correct term is pin weight.

The truck doesn't look overloaded at all, more along the lines the tractor is too far forward on the trailer? Idk what I would have done diff with the batwing though.

 

[rustyshakelford]

I guess I should have said looks like a good size load there with a good amount of I would say tongue weight but I guess the correct term is pin weight.

The truck doesn't look overloaded at all, more along the lines the tractor is too far forward on the trailer? Idk what I would have done diff with the batwing though.

Trailer is 35+5, I pulled forward and flipped the ramps up then backed the shredder on them a move the load back. Everything is just heavy. Trailer weights 10k, added a 500+lb compressor to the neck doesn't help either. If I can get the shredder loaded on first without much trouble I think it'll take the weight off the pin some more. The tractor is heavy as is the shredder. Other thing would be to add airbags, but I've had them on every other truck and don't want them this time

Brett

 

[BrokeFarmerJohn]

What's the turning radius on a rig like that? Lol

If you jack knifed it you would be over 110ft circumference.

 

[rustyshakelford]

What's the turning radius on a rig like that? Lol

If you jack knifed it you would be over 110ft circumference.

Dunno. The 450 has a 45 degree turning angle with the wide track front axle so that helps some. Prolly wouldn't be much to write home about though! I know it'll get the trailer tires backing and dragging

Brett

 

[JESSE1]

I doubt that a short bed F-350 turns as short as an F-450. I'm on my third F-450 pickup and I've been very satisfied in how it handles a load.

 

[TomSeller]

I doubt that a short bed F-350 turns as short as an F-450. I'm on my third F-450 pickup and I've been very satisfied in how it handles a load.

Both nice looking trucks !

 

[fordmantpw]

My '17 has been sitting at a rail yard 100 miles away for nearly two weeks. Waiting (im)patiently for it to show up at my dealer. Hopefully this week is the week!

 

[ovrszd]

My '17 has been sitting at a rail yard 100 miles away for nearly two weeks. Waiting (im)patiently for it to show up at my dealer. Hopefully this week is the week!

We'll need pics of course!!!