dinoedwards
Silver Member
- Joined
- Nov 15, 2021
- Messages
- 138
- Tractor
- kubota
Just called Mechmax.com said ad is fake!!!!1-315-750-4008
Anyone have a MechMaxx 3-pt stump grinder?
- Thread starter deezler
- Start date
- Views: 68291
-
- Tags
- stump stump grinder
Code54
Elite Member
- Joined
- Aug 20, 2005
- Messages
- 4,298
- Location
- Putnam Co. West Virginia
- Tractor
- Kubota MX5100, Kubota BX25D,1957 Farmall Cub Lo-Boy Kubota KX91-3, BCS 853
3-Point PTO Stump Grinder with 34 Carbide Teeth (PTO Shaft Included with Slip Clutch), for 15-45HP Tractor, SG24
MechMaxx 3-Point PTO Stump Grinder Model SG24 is a great tool for landscaping, its suit for 15-45hp Tractor. This machine equipped with a slip-clutch PTO, ensuring you peace of mind as you tackle stump removal tasks with precision and safety. Included with the SG24 Stump Grinder is a slip clutch...
mechmaxx.com
Here is the REAL site.
"there's no readily available information to confirm the existence or legitimacy of a website specifically at "mechmax usa.com".
The following information is based on search results:
- The official MechMaxx website is "mechmaxx.com".
- "mechmaxx.com" uses SSL encryption to protect payment information."
dinoedwards
Silver Member
- Joined
- Nov 15, 2021
- Messages
- 138
- Tractor
- kubota
Yeapers! Thx, had it in my cart before I called before ordering it, $1399 isn't bad though.
Ordered April 10, got email confirmation soon after. On April 11, got a mail changing the shipping time from 15-18 days to 4-5 weeks. Got an email on May 20 that it had been shipped. later that day I got a call from Fed Ex Freight scheduling shipping for next week. Maybe I'll get to try it out soon.
polarred21
Platinum Member
My sincere apologies for sharing bad information. I started filling out the order form but stopped before payment. They did send me an email to remind me of this purchase.
LMychajluk
Silver Member
I placed an order last week and got an order # right away. Last night (Fri), I got a shipping confirmation on the Flail Mower I ordered, but it doesn't seem to include the Stump Grinder, though there is a note that multiple items may ship separately.
Edit - Regarding the site w/ the $990 price for the SG24, I'm not saying it is or isn't legit, but that domain was just registered 2 weeks ago - https://www.godaddy.com/whois/results.aspx?domain=mechmaxusa.com (by a company out of Lithuania, it seems...)
Last edited:
Code54
Elite Member
- Joined
- Aug 20, 2005
- Messages
- 4,298
- Location
- Putnam Co. West Virginia
- Tractor
- Kubota MX5100, Kubota BX25D,1957 Farmall Cub Lo-Boy Kubota KX91-3, BCS 853
It is good you did. Everyone got it figured out, and this most likely prevented others from ordering and having an issue!
RjCorazza
Elite Member
I checked the link, and to be honest, nothing seemed odd except the price. I'm usually pretty tuned in to potential scams, but this one may have gotten me if I were in the market for a grinder.
John_Mc
Elite Member
- Joined
- Aug 11, 2001
- Messages
- 4,512
- Location
- Monkton, Vermont
- Tractor
- NH TC33D Modified with belly pan, limb risers & FOPS. Honda Pioneer 520 & antique Coot UTV
As noted back in post 160, I called MechMaxx to check: the site with the $990 price is a scam.
Last edited:
OP
deezler
Elite Member
- Joined
- Jan 30, 2012
- Messages
- 3,611
- Location
- Southeast MI
- Tractor
- Cub Cadet 7305, Kioti CK3510seh TLB
Bummer about the scam site. Always stay vigilant when shopping online!
I ground about, oh, 20 stumps this long mem day weekend. Unit performed like a champ.
I had some black walnut stumps in my woods from when I got them logged for veneer way back in 2012. They were still hard as heck!
Then I felled several smaller living trees and gosh, the fresh wood is SO much easier to get ground up quickly.
I probably got way too complacent because I ended up just staying in medium range and pulling the grinder through the stumps rather quickly - I now think a gear tractor would do just fine with these units. You might be on the clutch a lot, but you can pull through a cut at 1-2mph no problem - Just need to manage the depth of your cut appropriately.
I did stall the tractor once with an accidental big bite. That sucked, but everything seems fine. Guess my slip clutch was not set right after all, will back the bolts off a couple turns.
But anyway, done with this machine for now. Feel like I got my money's worth already, and it's barely broken in! I hadn't turned my shipping crate into a dolly yet or anything like that, so I realized it's still a very handy way to store the grinder when not in use, easy to move around with my pallet forks.
I ground about, oh, 20 stumps this long mem day weekend. Unit performed like a champ.
I had some black walnut stumps in my woods from when I got them logged for veneer way back in 2012. They were still hard as heck!
Then I felled several smaller living trees and gosh, the fresh wood is SO much easier to get ground up quickly.
I probably got way too complacent because I ended up just staying in medium range and pulling the grinder through the stumps rather quickly - I now think a gear tractor would do just fine with these units. You might be on the clutch a lot, but you can pull through a cut at 1-2mph no problem - Just need to manage the depth of your cut appropriately.
I did stall the tractor once with an accidental big bite. That sucked, but everything seems fine. Guess my slip clutch was not set right after all, will back the bolts off a couple turns.
But anyway, done with this machine for now. Feel like I got my money's worth already, and it's barely broken in! I hadn't turned my shipping crate into a dolly yet or anything like that, so I realized it's still a very handy way to store the grinder when not in use, easy to move around with my pallet forks.
