Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,922
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
Thanks, one reason that I am concerned is the previous F Series model was rated at 30 horsepower and I only used it with a post hole auger on one project.25 Hp = 18.65kW, so it should have more than enough power to turn generator at full load and hold rpms/freq.
-------------------------------------.
Don't know what Bobcat changed causing a lower PTO rating.
Hope to hear from some Toolcat owners that might have had overheat problems with the hydraulic PTO.