Anyone using BX24 power beyond for other stuff?

[RayBo]

Hello all,

Have any of you used the rear hydraulics for something other than the BH? Considering a 3PH log splitter, lift cylinder for dump trailer, etc..

I know there needs to be an open loop as with the BH off, one hose couples to the other.. Also know there are open circuit and closed circuit valves, etc..

Anyone that has been there and done it?

Thanks,

RayBo

 

[MadReferee]

No matter what you do you will need an open center valve to control whatever you are going to connect to. Fluid must flow into that valve and out of that valve back into the tractor when the valve is in neutral.