B21

[dfkrug]

I was just offered a B21 w/ RT, RMRM, RB, BB, & PHD for 5K.

Of course, $5K US is ridiculously low, unless it is upside down in a ditch
somewhere.

The B21 is sold as a TL or TLB and it is still listed in the current price list.
The TL still gets the mainframe and is backhoe-ready.

I have been putting some hours on my B21 recently, mostly to see how
well the 4n1 FEL bkt works on such a small CUT. I also wanted to compare
the hoe to my CK30's hoe.

Photo shows the FEL at max lift. I could not move these rocks very
effectively withont the 4n1. I am selling the B21 this spring to make room
for the next project. It will be missed.

 

[daro]

Update,
Please accept my apologies as the info I received was incorrect at best. Though the brochure showed a B21 and assoc. implements this is not the tractor to be. As yo mammma says Ductape.

Hears the deal and I'm awaiting afew more details and photos.
B7300 CUT - probably a 99 or 00
1st owner 100hrs.
2nd owner 200hrs.
no known defects or issues with engine or tranny, good tread
includes:
factory bucket w/aftermarket tooth bar
48" rotary cutter (cond. unknown)
boxscraper (cond. unknown)
rear blade modified from a heavier/larger blade down to width of the tractor (cond. unknown)5
post hole digger Cond./auger size unkown
5K is a starting point, could poss. get in the upper3K to lower4K range

Its not the build of the B21 and I agree that was to good to be true. It still sounds as if I could do well with this tractor package for my needs.

I'll need a 3PH finish mower or a belly finish mower.
I can hire the back hoe work or investigate one for theB2300.
Any suggestions?

Any sound advice about this update is greatly appreciated.

Thanks again for your time.
Daro

 

[Bird]

Still sounds like a bargain to me.