B2920 chain clearance

   / B2920 chain clearance #1  

MMS

New member
Joined
Nov 28, 2010
Messages
6
Location
Central CT
Tractor
Kubota 2920, JD 316
I just bought a set of 2 link chains for my tractor's rear tires (turfs) from tirechain.com. I was planning to install them as a weekend project, but after placing them on the tire to check the clearance, it looks like I'm going to have about a 1/2" of clearance between the chains and my fender.

I was planning on reducing the tire pressure, putting the chains on and re-inflating to get a tighter fit, but with only a 1/2" of clearance, I thinking I may be wasting my time.

Based on your experience, do I have a prayer of making this work with a 1/2" of clearance or should I bite the bullet and make arrangements with the dealer to get spacers?

Any help would be appreciated.
 
   / B2920 chain clearance #2  
When I contacted tirechains.com they recommended a minimum of 3" clearance. This sounded excessive, but this is what they said. Therefore I chose a different option. 1/2" sounds a bit tight based on my experience with another tractor with similar chains as yours.
 

Tractor & Equipment Auctions

Perfecta Harrow (A49251)
Perfecta Harrow...
TOFT 06T Excavator Thumb (A49251)
TOFT 06T Excavator...
John Deere 275 3pt Disc Mower (A49251)
John Deere 275 3pt...
2015 Toyota Prius C Hatchback (A46684)
2015 Toyota Prius...
Kohler Fast Response II 30kW Diesel Generator (A46683)
Kohler Fast...
1998 Kenworth T800 Wet Kit Tri Axle Day Cab Truck Tractor (A46683)
1998 Kenworth T800...
 
Top