B2920 loader interferance with subframe?

[ericher69]

Does anyone know if I can mount the la364fl while not having to totally remove my front mount quick hitch for blower/blade?

Did a quick search but no immediate threads covering my query!

Thanks

 

[sierradmax]

I think the B2733A quick hitch is fabricated to clear the loader subframe. I came across this link when looking at the B2733, which is used on the older "B's".
http://www.tractorbynet.com/forums/...ng/129413-anyone-put-kubotas-front-quick.html

I think they slightly modified the hitch which added the "A"

 

[Evil the Weasel]

The manual advises against doing this. When you connect the loader hoses to the FEL, the quick hitch is going to leak down and potentially jam into something. The quick hitch goes off and on quite easily so I think it's worth the extra time to remove it for FEL use. I have a little moving dolly for my quick hitch to facilitate swaps.

 

[ericher69]

The manual advises against doing this. When you connect the loader hoses to the FEL, the quick hitch is going to leak down and potentially jam into something. The quick hitch goes off and on quite easily so I think it's worth the extra time to remove it for FEL use. I have a little moving dolly for my quick hitch to facilitate swaps.

I should have specified...
I will remove the quick hitch (mid PTO ) part to increase ground clearance.

I was more specifically looking for interference with any bolted on parts that cannot be easily removed.

Thanks

Eric