B3200 or B2620? Help the rookie!

[TripleR]

If you don't have position control, this was provided to me by another member.

Mower Deck Height Stabilizers - SSB Tractor

 

[KU Gator]

TripleR,

Have you tried this system. Looks like a pretty cheap fix if it works.

Thanks.

 

[TripleR]

It, along with PATS is on order. Some people have fabricated them and they report good results.

 

[KU Gator]

I think I will order a set today so I have them before mowing season.

I ordered the Pat's system after the 1st fight I had even getting the rotary mower off. Admittedly some of the fight was due to my lack of knowledge at the time, but it makes changing implements a non issue. I made up a couple of spreaders for the lower arms on the 3pt hitch out of PVC with a notch in one end to slide it on and off. I got the adjustable spreader with the Pat's system, but the PVC works easier.

Thanks again. I was planning on making something, but for the money, this looks like a good fix.

 

[TripleR]

I think I will order a set today so I have them before mowing season.

I ordered the Pat's system after the 1st fight I had even getting the rotary mower off. Admittedly some of the fight was due to my lack of knowledge at the time, but it makes changing implements a non issue. I made up a couple of spreaders for the lower arms on the 3pt hitch out of PVC with a notch in one end to slide it on and off. I got the adjustable spreader with the Pat's system, but the PVC works easier.

Thanks again. I was planning on making something, but for the money, this looks like a good fix.

I forgot who told me about the deck height stabilizer, but I got the heads up on the PATS from TEXASJOHN. I was looking at a quick hitch system, but I think I will like the PATS better. Thanks for the hint on the PVC.

 

[Machold]

Both great tractors; the BX series is probably not the way to go. I'd say a B3030 would be the best bet.