Backhoe for Deere 3033r
- Thread starter WinterDeere
- Start date
- Views: 1577
OP
WinterDeere
Super Member
- Joined
- Sep 6, 2011
- Messages
- 5,510
- Location
- Philadelphia
- Tractor
- John Deere 3033R, 855 MFWD, 757 ZTrak; IH Cub Cadet 123
I see that. Might be a good buy, if complete and ready to roll. But I'm honestly not sure how to verify that from the information and photos given. If it needs $1500 in miscellaneous missing dealer-only bracketry to get it installed, then it's not such a great deal.
Any suggestions on how to proceed?
Rob REECE
Bronze Member
I would maybe give them a call to see what kind of shape it was in and make them an offer. As far as the brackets and the power beyond kit you would have to buy those even if you bought new. That is costs you just would have to pay nomatter what you buy.
OP
WinterDeere
Super Member
- Joined
- Sep 6, 2011
- Messages
- 5,510
- Location
- Philadelphia
- Tractor
- John Deere 3033R, 855 MFWD, 757 ZTrak; IH Cub Cadet 123
No worries on power beyond, already have that for some of my other implements (e.g. dump wagon). More concerned with any backhoe subframe-specific components.
Location I saw listed was Wilksboro NC, which is a 16 hour round trip from here, but I have LTL trucking accounts for my business, so might look at having it shipped if seller can palletize.
Location I saw listed was Wilksboro NC, which is a 16 hour round trip from here, but I have LTL trucking accounts for my business, so might look at having it shipped if seller can palletize.
Rob REECE
Bronze Member
Well good luck. Hope it works out for you. Let me know if you get it.
flyingace43
Member
- Joined
- Jul 26, 2015
- Messages
- 36
- Location
- Erie PA
- Tractor
- Yanmar YT347 cab, JD X370, Kawasaki Terex 800, Bandit SG40
I had a 3039R and I found A 375 hoe used for 7K and the mounting brackets came with it but I had to drive 500 miles to pick it up but it was brand new the guy hardly used it. I did have to buy the power beyond kit which was around $500 and easy to install. Hope you can find a good used one somewhere, good luck
Carl_NH
Elite Member
- Joined
- Apr 5, 2002
- Messages
- 3,693
- Location
- Coastal NH
- Tractor
- 01 Kubota B21TLB, 2010 Ferris 52" ZTR, Cub Cadet 1811, Gravely Super8
Here's a 375a in Dalton PA (should be ~ 2 hrs from you) that says it fits on the 3033 $7500 and 20 hrs Log into Facebook
No real reason it has to be a Deere branded one, is there?
8' Tractor Backhoe Attachment with Hydraulic Thumb, 15" Bucket, Self-Contained Pump, for 20-100 HP, Cat. 1&2 Tractor, BH760
Max. Digging Depth 8 ft Hydraulic Volume Requirements 5 to 6 GPM Digging Depth (two foot flat bottom) 7 ft 6 in Hydraulic Pressure Requirements 2250psi Swing Arc 180 Degrees Hydraulic Tank Capacity 4.1 US Gal (15.5L) Loading Height (bucket at 60 °) 6 ft Hydraulic Type Recommended AW 46 Reach...
mechmaxx.com
Last edited:
OP
WinterDeere
Super Member
- Joined
- Sep 6, 2011
- Messages
- 5,510
- Location
- Philadelphia
- Tractor
- John Deere 3033R, 855 MFWD, 757 ZTrak; IH Cub Cadet 123
That's better! Contacting...
What's the time required to swap one of these onto a new tractor? Wondering if it makes sense to ask seller to just haul my tractor out there and do the change-over right on-site. Two birds, one stone:
1. Make sure nothing critical to install is left on seller's machine when we take it off.
2. Easy way to unload it at home.
I imagine these things are pretty tippy and unstable on a trailer when stood upright without attachment to a tractor.
