Bent my quick attach

   / Bent my quick attach #31  
In the 3rd picture, to the left of the red dot in the hole of the level, and just below that, I'd smack that somegun with a sledgehammer a few times and all would be well. No heat needed.
Yes, i agree, i'd give that a little work with the sledge, should straighten enough for PT work. To coin a phrase.
 
   / Bent my quick attach
  • Thread Starter
#33  
THere is a second bend but I do agree this is completely fixable. My time, however was more precious.

That said, the attach is very worn. and it has 2 additional bends (the tips are bent) and there is a secondary bend favoring the top right of hte plate.

But yeah, time, torch, hammer and some patience would have saved me the $200.
 

Tractor & Equipment Auctions

Yanmar YFL-1575 33HP Utility Loader Tractor (A49461)
Yanmar YFL-1575...
KUBOTA L2350 TRACTOR (A51243)
KUBOTA L2350...
Harper SB1300 Straw Blower with Hose (A51039)
Harper SB1300...
1977 Allis Chalmers 7060 Tractor (A50514)
1977 Allis...
2013 UTILITY VS2DX 53FT DRY VAN TRAILER (A51222)
2013 UTILITY VS2DX...
2016 LINK-BELT 235X3 SPIN ACE EXCAVATOR (A50854)
2016 LINK-BELT...
 
Top