Bought a new L3560, state shut down the project. Sell or keep?

   / Bought a new L3560, state shut down the project. Sell or keep? #11  
It is very hard to ascertain everyone's individual circumstances on a post like this in a forum. But if you really don't need it anymore, selling it for as much as the market will bear certainly seems like the most logical and reasonable course forward. You may be pleasantly surprised at how much it is worth.
 
   / Bought a new L3560, state shut down the project. Sell or keep? #12  
Well according to the other current thread about a decline in tractor sales, a new 3560 goes for 80,000 maple-syrup bucks up in Canada. So I would trailer it up there and sit on the side of the road with a sign until a sufficient briefcase of cash appears.
 
   / Bought a new L3560, state shut down the project. Sell or keep? #13  
I’m guessing they said you disturbed more than an acre and needed a Storm Water Pollution Prevention Plan? The engineering company I worked for always prepared one and put it in our plans, it was a pretty simple and standard thing.
 
   / Bought a new L3560, state shut down the project. Sell or keep? #14  
You can buy a small tractor like you think you will normally need for a lot less money.

If there is any chance of needing or making use of the L3560 I am the type to hold on to it. Financial sense be darned. :)
 
   / Bought a new L3560, state shut down the project. Sell or keep? #15  
If tractor prices keep running up like they have for the past few years, another way of looking at this is you could keep and use the tractor for a few years more and then resell for about what you paid for it.
 
   / Bought a new L3560, state shut down the project. Sell or keep? #16  
Ran into a similar situation on a subdivision build.
EPA was trying to say a drainage was a blue line stream. Developer finally got it sorted out and we proceeded as planned.
Nothing attorneys and money cant fix.
 
   / Bought a new L3560, state shut down the project. Sell or keep? #17  
The shed is a go. The state essentially told me that if another dump truck pulls into my property, they will bring the Army Corps of Engineers in with Excavators and remove everything I did and bill me a couple million $$.

We got shut down in the late spring this year as some idiot called me and 5 others doing fill work in to the EPA. Once they came and saw that in the bottom of the ravine there is a "creek" (water run off caldron from road run off) that flows equal to or greater than 3 times a year.... I was done at that point.

So we have to go buy 400' of 12" erosion sock and stakes, get those installed and inspected. Then we were allowed to bring in a couple triaxles of screened top soil and manually throw/spread it. Then I had to rent a hydroseed machine and spend around $1500 for the hydroseed, fertilizer and mulch to spray it all, then a truck load of straw and some straw blanket rolls. Then brought in a triaxle and a half of #3 to build a berm along the top edges to break up any rain water flow that could erode trenches. Now we have abut 2' of grass over the entire fill edge down to the old retired road.

I attached a somewhat dated early 2021 sat image with a white measurement line that approximates the silt sock placement and current extent of the driveway widening project. I did manage to end up with a 110'-130' wide driveway, so that is a win. When I started, the asphalt was placed to the edge of the steep ravine. Now Triaxles pull in and do a U-Turn in the upper driveway, I can pull the fifth wheel down back and point to the woods with the truck and back it straight to the house and lower level garages.

Where you see the mowers, the new 12x30 shed will be to the laft of that area, the back will face the 3.5 acre side yard. So the tall doors on the 12' tall and 30' long wall will face the 200' mark on the measurement line. The smaller set of doors will face the lower garages on the house. The roof will slant back to the 8' tall wall that is facing the side yard.

I may try next year to pay an engineer to draw up an erosion and settlement plan and attempt to get a permit to push out further into the side yard. I had planned 40' further into the yard and keeping the extension into the woods at the same distance from the house, but widen it by that 40' more. As it is, I can fit my 3 trailers in that "cove" out by the woods behind the house.... out of sight from the public. My goal has been to create as much useable flat area as possible and to be able hide my stuff out of site. I like the front to be "clean", just the house and landscaping.

So for now, I am being told that this is the end of my fun. I learned some other lessons here as well. When they count SQ/FT of land disturbed, they start at 1989 when the house was built and add in the creation of the foundation, the creation of the driveway... every sq/ft that was ever disturbed got added into my current project. I find this be crap, but they are saying that this is how they look at it.
Always get permits in advance is the key takeaway here
 
   / Bought a new L3560, state shut down the project. Sell or keep? #18  
You could list it for what you believe it to be worth and only sell it if you get your price. If you have the financial means to hang on to it, you certainly have enough land to justify it, though mostly woods. If you can't get your price out of it, you may not be netting that much savings by the time you get the other one bought. Especially if you have to swap out attachments too, that may be a hard exchange right now, to get everything replaced that you need. You could end up at a wash, savings wise.
 
   / Bought a new L3560, state shut down the project. Sell or keep?
  • Thread Starter
#19  
I just went to Build My Kubota, to build it again today it is $63,595 list price. It is up around $6000 from a year ago when I bought mine. This list does not have the $1000 top and tilt kit, the online build tool does not allow it with the backhoe picked. But my dealer did order and install it, I just have to unbolt and remove it all any time I need the backhoe. It is not hard, it takes 10 minutes to remove or replace.
 

Attachments

  • L3560 Build list 2.jpg
    L3560 Build list 2.jpg
    103.7 KB · Views: 121
  • L3560 Build list.jpg
    L3560 Build list.jpg
    241 KB · Views: 142
   / Bought a new L3560, state shut down the project. Sell or keep?
  • Thread Starter
#20  
Also, mine was a 3560LE, but the dealer added back the missing items to bring it back to a full L3560 with cruise, lights, mirrors and whatever else was required. Since I bought in the middle of the Covid production mess with little inventory, I took what was on the ground and just had them bump back all of the missing stuff. Plus we swapped out the glass for the defrost glass, and I added a BT car stereo and had the tires filled with Rim Guard. Its about as loaded up as you can get it aside from me cheaping out on the hydraulic thumb... I bought the manual adjustable thumb.
 

Tractor & Equipment Auctions

3047 (A46502)
3047 (A46502)
Avant 420E (A42021)
Avant 420E (A42021)
2006 Ford Expedition XLT SUV (A46684)
2006 Ford...
2009 TRAIL KING PNEUMATIC TRAILER (A45333)
2009 TRAIL KING...
2020 Rawmaxx XCH-40-210K 40ft 20,000lb T/A Gooseneck Trailer (A45336)
2020 Rawmaxx...
Lincoln Electric Vantage 300 Welder/Generator (A45336)
Lincoln Electric...
 
Top