Bucket Hooks

[Big Barn]

615944[/ATTACH]

ImD ... Steve

I can’t seem to find the manual on line.....

 

[goeduck]

Steve, there are times that my Kioti is too big to do the job here, and times that 580 sure would have come in handy... But I have one tractor and I will make do with it.

Oh come on now, two is better than one. Three is better than two,,, so on and so on. :thumbsup:

 

[k0ua]

Oh come in now, two is better than one. Three is better than two,,, so on and so on. :thumbsup:

Two is one. One is none..

 

[Imold]

For those who don’t weld you can always put on the bolt on hooks so you can at least use them and if you ever take your tractor into the shop they can just run a weld around the hook plate and then you don’t need to worry about the bolts doing all the holding, they can also remove the bolts and weld up the bolt holes holes.


Jim.

 

[kennyd]

For those who don’t weld you can always put on the bolt on hooks so you can at least use them and if you ever take your tractor into the shop they can just run a weld around the hook plate and then you don’t need to worry about the bolts doing all the holding, they can also remove the bolts and weld up the bolt holes holes.


Jim.

If you watch our proof testing video's you can see that the bolts will hold anything a compact tractor can deliver.

 

[WranglerX]

For those who don稚 weld you can always put on the bolt on hooks so you can at least use them and if you ever take your tractor into the shop they can just run a weld around the hook plate and then you don稚 need to worry about the bolts doing all the holding, they can also remove the bolts and weld up the bolt holes holes.


Jim.

A grade 8 bolt has 150,000 lb. PSI (120,000 lb. proof) failure rating, that is like 75 tons, seriously doubt any "farm" tractor can put that much stress on bolt.... A weld will probable rip out long before bolt fails....Personally I have no problem or doubts that two grade 8 bolts will hold sufficiently....

Dale

 

[Diggin It]

I ain't a'drillin' no holes in a support member.

 

[BRMyers]

We installed a set of Ken's Bolt on hooks on my dad's tractor (MF383). He liked mine so much, he wanted a set on his bucket.

 

[WranglerX]

I ain't a'drillin' no holes in a support member.

Its OK.... We all have our own paranoia's....

Dale

 

[Imold]

Mine are bolted on and I’m not worried about a thing, I’m sure my bucket will bend from abuse before anything else happens.