Build Your Own 3 Point Carry All

[nyone]

Dj54...now thats a carry all! I like that design.

 

[DJ54]

Dj54...now thats a carry all! I like that design.

Thanks, I pretty much copied the frame of a bale carrier I have, with some extra bracing to take the force of the cylinder, then added the dump bed on top. The original plan in my mind, was to make removable side boards, but it will carry enough dirt/stone as it is, that it's all the Ford 2000 will handle.

With the hydraulic top link used on it later, I can tilt it forward enough, that hauling fence posts, etc. it won't roll off. I used it more than several years ago to haul old fence posts, from a fence line I tore out. Pulled posts with the Bobcat, then loaded on the carry-all, then hauled and dumped them on a burn pile.

Back then, I had about $250 in steel, hydraulic lines, and fittings, and was worth every penny. It should last me a life time.

 

[mpsmith60]

I built this about 15 years ago. Comes in handy for many jobs, from mucking stalls, and carrying to the compost pile, to hauling hay, firewood, dirt, stone, etc, etc.. At the other place, was handy when gathering rocks out of the field, and pasture. Then back up to a wash below the pond outlet, and dump.

A hydraulic dump carry all! Now that's cool!

 

[Gregster613]

DJ54, I agree wholeheartedly!! What a neat carryall. Great design and metal working capability. Greg

 

[Imold]

Well all is done but some paint, think I will do some sort of red to make it stand out hahaha.

 

[mpsmith60]

Well all is done but some paint, think I will do some sort of red to make it stand out hahaha.

That’s looking good!