Build your own European/triangle/delta hitch

bcp · May 21, 2014

Instructions start here:

Triangle quick-attach to 3 point hitch | Farm Hack

Bruce

Renze · May 21, 2014

Its called the Accord system, named after the airseeder company that invented it. (now Kverneland)

Redneck in training · May 21, 2014

bcp said:
Instructions start here:

Triangle quick-attach to 3 point hitch | Farm Hack

Bruce

There is similar device made in USA called Delta hook. 3 point hitch | 3 point quick hitch | 3 point tractor hitch | The Deltahook

Renze · May 21, 2014

The delta hook wont last a day pushing dirt with either of my tractors..

Scooby074 · May 25, 2014

Subscribed. A accord style hitch is on my to-build list.

I also like the new ones from Gangl Gangl Docking Systems

loggergreg · Nov 29, 2016

I built one patterned after a jiffy hitch using 2 inch square tubing with 1/4 wall thickness, and welded a piece of 3/16 x 2 flatbar to the face of it so it matches up with 3 inch ship channel for the implement side. the nice thing about the way the jiffy hitch is made, is it incorporates a 2 inch receiver tube in the design so you can just put a trailer hitch in the tube and go. I will post pictures of mine soon.

CADplans · Nov 29, 2016

What can a Delta hitch do that a $79 hitch from HF not do??

budepps3760 · Nov 29, 2016

Redneck in training said:
There is similar device made in USA called Delta hook. 3 point hitch | 3 point quick hitch | 3 point tractor hitch | The Deltahook

I am just a poor old working man. $1,200 bucks is a lot of money for this system. I guess if you farm for a living and make your living off your tractor then it's worth it.

Renze · Nov 30, 2016

Scooby074 said:
Subscribed. A accord style hitch is on my to-build list.

I also like the new ones from Gangl Gangl Docking Systems

I just dont like the U joint angles on that setup...

GLyford · Nov 30, 2016

CADplans said:
What can a Delta hitch do that a $79 hitch from HF not do??

According to the video, it connects the PTO and hydraulics too, so you can swap everything without leaving the seat...?

loggergreg · Nov 30, 2016

I built my hitch for the tractor and 4 implements for around $200. I really like the self aligning of the hitch, if you get anywhere close to lined up it will connect. also I think my hitch keeps the attachments closer to the tractor which is important on small tractors.