Bush Hog Maintenance

   / Bush Hog Maintenance #1  

Jer

Member
Joined
Nov 20, 2003
Messages
26
Location
So. California
Tractor
Two tractors..both Mitsubishi. MT160D 4WD with a Brush Cutter. The other is a MT1601 4WD with a loader
I’ve purchased a tractor with a 48” rotary Texas Belton Continental “Bush Hog”. I think its about 15 or 20 years old. I do not have a Manuel with the machine and would like to know what type oil to use if needed in the transfer case on the rear and also what other maintenance may be required.
Thanks, Jerry S.
 
   / Bush Hog Maintenance #2  
You probably will need to use 80w to 90w gearbox oil.

As for other maintenence, find all grease fittings and make sure to keep them well greased.
 
   / Bush Hog Maintenance #3  
I agree with Dave, keep the gearbox up to level and keep the blades sharp. Good Cutting!
 
 

Tractor & Equipment Auctions

New 4-235/80R16 Montreal Trailer Tires (A50774)
New 4-235/80R16...
2015 KENWORTH T660 SLEEPER TRUCK (A50854)
2015 KENWORTH T660...
2017 JLG Skytrak 6036 6,000LB 4x4 Rough Terrain Telehandler (A50322)
2017 JLG Skytrak...
2022 LEGUAN 190 SPIDER LIFT (A51242)
2022 LEGUAN 190...
Stump Bucket (A50322)
Stump Bucket (A50322)
2018 VOLVO VNL TANDEM AXLE SLEEPER (A51222)
2018 VOLVO VNL...
 
Top