Rotary Cutter Bushhog Blades Question

   / Bushhog Blades Question #12  
I haven't met a bushhog but that either the 1-5/8 or 1-3/4 socket would not fit.

6-point of course

They might fit, but not well. 1-11/16" is the proper size for the vast majority of Bush Hog, Landpride and some Woods blade bolt nuts. 1-5/8" will fit exactly none of these nuts when new.
 
   / Bushhog Blades Question #13  
They might fit, but not well. 1-11/16" is the proper size for the vast majority of Bush Hog, Landpride and some Woods blade bolt nuts. 1-5/8" will fit exactly none of these nuts when new.

I think it was the old nuts I was using. 1-5/8 almost just fit, but the nuts were really rusty. dressed them a bit and the 1-5/8 fit like a glove.

Then in my set, I grab the next size up for blades. To be honest, it might be a 1-11/16, I never look at the size. I just know where it is located at in the case.
 
   / Bushhog Blades Question #14  
Just went to the shop and looked. I have been using a 1-3/4 for sure. 6-point. No way would I do it with a 12-pt. Still worth having a full 3/4 drive set....even if you choose to buy the 1-11/16 separate.
 
 

Tractor & Equipment Auctions

ATLAS 10 1/2' DISC HARROW (A51243)
ATLAS 10 1/2' DISC...
UNUSED FUTURE HYD HOSE BUNDLE (A51244)
UNUSED FUTURE HYD...
Turfco Mete-R-Matic III Pull-Behind Top Dresser (A51691)
Turfco...
UNUSED CFG INDUSTRIAL STSD10 QUICK ATTACH SEEDER (A51244)
UNUSED CFG...
2017 Terex Warrior 1800 Screener (A50322)
2017 Terex Warrior...
2013 Chevrolet Impala Sedan (A51694)
2013 Chevrolet...
 
Top