milkman
Elite Member
- Joined
- Sep 22, 2001
- Messages
- 3,555
- Tractor
- BX2200, BCS 735
BX Whatyacallit
- Thread starter milkman
- Start date
- Views: 41203
OP
milkman
Elite Member
- Joined
- Sep 22, 2001
- Messages
- 3,555
- Tractor
- BX2200, BCS 735
OP
milkman
Elite Member
- Joined
- Sep 22, 2001
- Messages
- 3,555
- Tractor
- BX2200, BCS 735
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,512
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Looks good. I'd imagine that would make the engineers squirm in their chair, and the warranty people sweat. But it looks like fun too. /forums/images/graemlins/wink.gif
Have pics of the 'makings' in progress?
Have pics of the 'makings' in progress?
JerryG
Super Member
<font color="blue"> BX Whatyacallit </font>
How about BXGoat as in Billy Goat? /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
How about BXGoat as in Billy Goat? /forums/images/graemlins/grin.gif /forums/images/graemlins/grin.gif
SnoFalls
Silver Member
Dang looks almost amphibious.
"Bring your fishin' pole, wer goin' fishin' in the bx" /forums/images/graemlins/grin.gif
"Bring your fishin' pole, wer goin' fishin' in the bx" /forums/images/graemlins/grin.gif
HomeBrew2
Banned
COOL!!! You got the front ones done! Tried side-hilling it yet?
OP
milkman
Elite Member
- Joined
- Sep 22, 2001
- Messages
- 3,555
- Tractor
- BX2200, BCS 735
HB
Yes, finally, the old shoulder joint has been giving me a lot of problems so things have slowed down here, but I have been doing a little at a time, just finished this morning so haven't had a chance to get it on the hillside yet, but it will be a lot more stable I'm sure.
SnoFalls, I hear the old Honda three wheelers would float too, but they had a tendency to flip belly up, afraid that might happen with this too and the ROPS probably wouldn't help in that instance. /forums/images/graemlins/blush.gif JerryG, maybe BXtremeGoat /forums/images/graemlins/grin.gif
beenthere, since the warranty is long gone, I'll just have to keep an eye out for something to break, I got a few pics when I put the rear wheels together, but I have since took them apart and shortened the spacers so they would be closer together, when I take the fronts off, I can get some pics of how they are put together. The front wheels are held on with bolts so I had to make studs to put in the axle flange, I then used a connector nut to hold the front wheel on. The connector nuts were about 2" long so they were long enough to use a piece of all thread to extend out to hold the outter wheel on. I had to make a 1and1/4" spacer to go between the wheels, that was the hardest part to do, but it was fun work.
Yes, finally, the old shoulder joint has been giving me a lot of problems so things have slowed down here, but I have been doing a little at a time, just finished this morning so haven't had a chance to get it on the hillside yet, but it will be a lot more stable I'm sure.
SnoFalls, I hear the old Honda three wheelers would float too, but they had a tendency to flip belly up, afraid that might happen with this too and the ROPS probably wouldn't help in that instance. /forums/images/graemlins/blush.gif JerryG, maybe BXtremeGoat /forums/images/graemlins/grin.gif
beenthere, since the warranty is long gone, I'll just have to keep an eye out for something to break, I got a few pics when I put the rear wheels together, but I have since took them apart and shortened the spacers so they would be closer together, when I take the fronts off, I can get some pics of how they are put together. The front wheels are held on with bolts so I had to make studs to put in the axle flange, I then used a connector nut to hold the front wheel on. The connector nuts were about 2" long so they were long enough to use a piece of all thread to extend out to hold the outter wheel on. I had to make a 1and1/4" spacer to go between the wheels, that was the hardest part to do, but it was fun work.
Henro
Elite Member
- Joined
- Jul 4, 2003
- Messages
- 4,982
- Location
- Few miles north of Pgh, PA
- Tractor
- Kubota B2910, BX2200, KX41-2V mini EX
Milkman,
Look forward to seeing some detailed pictures showing how you did it!
I have a set of turf tires that I could put on the outside of the bars on my BX, to add stability on hillsides...if I felt the need.
Now you got me thinkin'...a dangerous proposition for certain... /forums/images/graemlins/shocked.gif /forums/images/graemlins/grin.gif
Look forward to seeing some detailed pictures showing how you did it!
I have a set of turf tires that I could put on the outside of the bars on my BX, to add stability on hillsides...if I felt the need.
Now you got me thinkin'...a dangerous proposition for certain... /forums/images/graemlins/shocked.gif /forums/images/graemlins/grin.gif
