BX22 50 hour service

   / BX22 50 hour service #11  
My Bx-22 transmission held 22 half quarts
 
   / BX22 50 hour service #12  
</font><font color="blue" class="small">( My Bx-22 transmission held 22 half quarts )</font>

Does that translate to 11 full quarts or 22 1/2 quarts??? /forums/images/graemlins/confused.gif
 
   / BX22 50 hour service #13  
very good
 
   / BX22 50 hour service #14  
I did my BX22 hyd trans fluid change, filter change & strainer clean it it was 2.8 gallons. That amount sticks in my head since I only got one 2.5 gallon + 2 qt and was short.

So the weird post of Full 22 1/2 qt (11 qt or 2.5 g) is within like 15% per the manual. Close enough for me.
 
   / BX22 50 hour service #15  
Yeah, I used a glass measuring cup that would only hold 1/2 at a time, How easy was the strainer cleaning.
 
   / BX22 50 hour service #16  
Strainer was easy. Had some metal particles on it (normal). Just make sure you have the o-ring in the correct spot when re-installing together.

I cleaned it (strainer) with brake clean and made sure it was dry before re-installing. Alsi put a small drop of oil on o-ring also.
 
   / BX22 50 hour service #17  
"...it was 2.8 gallons. That amount sticks in my head since I only got one 2.5 gallon + 2 qt and was short."

Sorry, now I'm even more confused! /forums/images/graemlins/confused.gif

I think you are saying that 2.5 gallons plus two quarts was not quite enough ("was short"), but that adds up to three gallons, which is more than 2.8 gallons... /forums/images/graemlins/confused.gif

Maybe I'm not reading something right -- wouldn't be the first time. So far we have reports of everything from 2.75 gallons (22 half-quarts = 11 quarts = 2 gallons + 3 quarts) to 3.75 gallons (1 gallon + 1 quart left in a five gallon jug). /forums/images/graemlins/tongue.gif

Another 20 hours or so and I'll know for sure! /forums/images/graemlins/laugh.gif
 
   / BX22 50 hour service #18  
Now that I have done a wonderful job of messing every one up here I go. Maybe this will clear this up.

I used (1) 2.5 gallon jug along with (2) qt of Hyd fluid for tranny. So that is I was short and had to add an additional qt of fluid. I also spilt some so it could be +/- 0.5 qt

If you get a total of 3-gallons you will be fine.
 
   / BX22 50 hour service #19  
OK, I think I got it that time!

I should be in good shape then (if I don't spill any!). I bought 12 quarts, plus I have one more that the dealer gave me earlier "just in case." I think I'll pick up another quart of engine oil though, as he only gave me three.

Looking forward to the "fun" -- hope it is warmer when the time comes.
 
   / BX22 50 hour service #20  
Filling it is a pain since you can over flow the funnnel quick and the placement of the hyd fill hoel is in a poor location.

I also think it takes 3 qts of engine oil or a tad more (like .2 of a qt). So total is like 3.2 or there about.
 

Tractor & Equipment Auctions

JOHN DEERE 3040 TRACTOR (A50459)
JOHN DEERE 3040...
2022 Case IH 8250 4WD Combine (A50657)
2022 Case IH 8250...
2015 Isuzu Sewer Jetter Truck (A49461)
2015 Isuzu Sewer...
2014 VOLVO VHD DAY CAB (INOPERABLE) (A50854)
2014 VOLVO VHD DAY...
2015 KOMATSU PC170LC-10 EXCAVATOR (A50458)
2015 KOMATSU...
2019 FORD F-650 SUPER DUTY BOX TRUCK (A51406)
2019 FORD F-650...
 
Top