Pat's Easy Change BX2230 and the Pat's Easy Change System

   / BX2230 and the Pat's Easy Change System
  • Thread Starter
#41  
Re: BX2230 and the Pat\'s Easy Change System

Danny,

Do you have the part number for those adjustable stabilizer links?
 
   / BX2230 and the Pat's Easy Change System
  • Thread Starter
#42  
Re: BX2230 and the Pat\'s Easy Change System

Update...

Folks,
FYI. The Pat's easy change system will not work with the Kubota GCK 60 Bagger kit. When standing behind the tractor, the right arm/system will not connect to the pin because the square box that contains the gear and shaft prevents the pin from entering into Pat's system. Pat's assembly is too beefy and just won't fit in the space available between the pin and the gear box assembly. If I can get a picture I will post later. This is in addition to the Top Link that I was going to have to modify for length. This mod would have been fairly simple with some steel stock and a welder but because of the other problem, It wont be necessary.

I am going to keep Pat's system though because I can put it on in 10 minutes and obviously it will help with the changing of my other implements.
Steve
 
   / BX2230 and the Pat's Easy Change System #43  
Re: BX2230 and the Pat\'s Easy Change System

Thanks for clarifying that. I didn't even consider that problem. Too bad because anything that would make it easier to put the bagger on/off would be appreciated.
 
 

Tractor & Equipment Auctions

PAIR OF 29 FT PIPE RACKS (A50854)
PAIR OF 29 FT PIPE...
2013 Ford F-150 XLT - EcoBoost, Blown Engine, Good Parts Truck (A51039)
2013 Ford F-150...
2007 Peterbilt 335 Mickey AO-A Battery Truck (A50323)
2007 Peterbilt 335...
Westendorf Gravity Wagon (A50514)
Westendorf Gravity...
2018 CATERPILLAR 249D TRACKED SKID (A51222)
2018 CATERPILLAR...
2004 CATERPILLAR 140H MOTORGRADER (A51406)
2004 CATERPILLAR...
 
Top