Pat's Easy Change BX2230 and the Pat's Easy Change System
- Thread starter stevenw
- Start date
- Views: 5634
Re: BX2230 and the Pat\'s Easy Change System
Update...
Folks,
FYI. The Pat's easy change system will not work with the Kubota GCK 60 Bagger kit. When standing behind the tractor, the right arm/system will not connect to the pin because the square box that contains the gear and shaft prevents the pin from entering into Pat's system. Pat's assembly is too beefy and just won't fit in the space available between the pin and the gear box assembly. If I can get a picture I will post later. This is in addition to the Top Link that I was going to have to modify for length. This mod would have been fairly simple with some steel stock and a welder but because of the other problem, It wont be necessary.
I am going to keep Pat's system though because I can put it on in 10 minutes and obviously it will help with the changing of my other implements.
Steve
Update...
Folks,
FYI. The Pat's easy change system will not work with the Kubota GCK 60 Bagger kit. When standing behind the tractor, the right arm/system will not connect to the pin because the square box that contains the gear and shaft prevents the pin from entering into Pat's system. Pat's assembly is too beefy and just won't fit in the space available between the pin and the gear box assembly. If I can get a picture I will post later. This is in addition to the Top Link that I was going to have to modify for length. This mod would have been fairly simple with some steel stock and a welder but because of the other problem, It wont be necessary.
I am going to keep Pat's system though because I can put it on in 10 minutes and obviously it will help with the changing of my other implements.
Steve
