Pat's Easy Change BX2230 and the Pat's Easy Change System
- Thread starter stevenw
- Start date
- Views: 5538
Re: BX2230 and the Pat\'s Easy Change System
I've not tried this, but I think instead of undoing the lift arms to attach them to fixed points while you mowed, (and if I needed to keep the arms up), I'd try running a bungee cord or two between the two attach points, and under the arms. That would be a lot faster than undoing the link arms. Or even use a light chain or rope.
Now this would only work if you didn't have anything mounted on the 3 pt...................
Am I missing something?
Ron
I've not tried this, but I think instead of undoing the lift arms to attach them to fixed points while you mowed, (and if I needed to keep the arms up), I'd try running a bungee cord or two between the two attach points, and under the arms. That would be a lot faster than undoing the link arms. Or even use a light chain or rope.
Now this would only work if you didn't have anything mounted on the 3 pt...................
Am I missing something?
Ron
Re: BX2230 and the Pat\'s Easy Change System
Exactly, or more correctly it will go down but will be uneven, as at some point in the travel, these two items work together....... /forums/images/graemlins/ooo.gif
That was what I was posting about. I tried to tie them up, then the deck was unlevel at the cut position.
Taking them loose and hanging them on the hooks is the reason they are there. This gets them high enough and lets the actual lifters work with the deck
Exactly, or more correctly it will go down but will be uneven, as at some point in the travel, these two items work together....... /forums/images/graemlins/ooo.gif
That was what I was posting about. I tried to tie them up, then the deck was unlevel at the cut position.
Taking them loose and hanging them on the hooks is the reason they are there. This gets them high enough and lets the actual lifters work with the deck
Re: BX2230 and the Pat\'s Easy Change System
Thanks, I found the tabs, now I know what they are for. I got the bars today, will be putting them on tomorrow after my trip to a local auction that has some interesting items in the implement line. Your photos of the arms were very helpful. Now I know how to do that too!
Thanks, I found the tabs, now I know what they are for. I got the bars today, will be putting them on tomorrow after my trip to a local auction that has some interesting items in the implement line. Your photos of the arms were very helpful. Now I know how to do that too!
