BX24 Floor Space Requirements
- Thread starter Mike_V
- Start date
- Views: 1913
-
- Tags
- kubota bx24
rbarker
Platinum Member
</font><font color="blue" class="small">( Before I buy a BX24, I'd like to know if I'll have room for it.
Thanks to anyone who knows or has good storage advice.
)</font>
I have a 10X16 CoverIt shed and it ain't big enough for my BX2200, loader, BH6000, york rake, and back blade to be stored all at once. Wider and longer would be helpful for when the loader and hoe are off.
Thanks to anyone who knows or has good storage advice.
)</font>
I have a 10X16 CoverIt shed and it ain't big enough for my BX2200, loader, BH6000, york rake, and back blade to be stored all at once. Wider and longer would be helpful for when the loader and hoe are off.
rbarker
Platinum Member
</font><font color="blue" class="small">( Before I buy a BX24, I'd like to know if I'll have room for it.
Thanks to anyone who knows or has good storage advice.
)</font>
I have a 10X16 CoverIt shed and it ain't big enough for my BX2200, loader, BH6000, york rake, and back blade to be stored all at once. Wider and longer would be helpful for when the loader and hoe are off.
Thanks to anyone who knows or has good storage advice.
)</font>
I have a 10X16 CoverIt shed and it ain't big enough for my BX2200, loader, BH6000, york rake, and back blade to be stored all at once. Wider and longer would be helpful for when the loader and hoe are off.
ChuckinNH
Elite Member, R.I.P.
- Joined
- Jun 23, 2003
- Messages
- 3,081
- Location
- NH
- Tractor
- (B2620, had BX22) Simplicity Legacy w/48" mmm
I just went out and measured my BX22. With the loader attached, bucket tipped forward so the bottom of the bucket is nearly vertical, and the backhoe mounted in transport position, mine measures about 17'4" long, and 53" wide over the stabilizers. It would be tight perhaps, but it looks like it would fit in an 18' long space stored as mine is.... if the BX24 is the same length.
