BX24 Flow rate
- Thread starter Aquaman
- Start date
- Views: 3770
-
- Tags
- kubota bx24
radioman
Super Member
If my memory serves me right, its somewhere 5.5 gpm. Geez, I gotta get one of those shop manauls with all this info.
OP
Aquaman
Silver Member
- Joined
- Dec 2, 2007
- Messages
- 187
- Tractor
- Kubota BX24
Thank you very much!! I don't know what we did before we had forums!
radioman
Super Member
Darn it ! I was close. thanks for the correction botabigot!
maybe I was think of 2500 rpms with 5.5 ? does your WSM say ? 
CHDinCT
Veteran Member
The total GPM for the BX24 / 50 series is 6.3 GPM (I'm looking at a brochure), but approx 2.6 is dedicated to power steering, so the available GPM to the FEL, 3PH or remotes would be only 3.7. Can't find the exact GPM for power steering, but those numbers should be very close. (The power steering GPM is not broken out in the brochure or owner's manual, but I've seen it somewhere.)
kennyd
Advertiser
That sounds close...some amount of the total flow is dedicated to the steering with a priority valve.
After reading three different sections in the WSM, here's the complete story...
Total output at pump 6.2 GPM @3200 RPM. Flow priority valve allocates constant 2.5 GPM to steering...so, remainder (3.7 GPM max) goes to implements. I apologize for not doing enough reading first time around...
Total output at pump 6.2 GPM @3200 RPM. Flow priority valve allocates constant 2.5 GPM to steering...so, remainder (3.7 GPM max) goes to implements. I apologize for not doing enough reading first time around...
radioman
Super Member
Thanks for the correction. Know we know.thanks for helping out .
