BX25 Full Cage Rollbar
- Thread starter Artisan
- Start date
- Views: 65786
-
- Tags
- kubota bx25
nuffer460
Bronze Member
- Joined
- Feb 19, 2010
- Messages
- 94
- Location
- Niagara County, Western New York
- Tractor
- 2008 NorTrac 254/ NT700 FEL, Massey 44 with Cultivator, Nuffield460/ 36A FEL
Artisan, First off very cool project. Second, I think that a lower winshield bar will be more than good. Like you are saying, It's not speed it's just a slow roll over. With the lower windshield bar tying both "A" post together. They are tied to the hallow bar. That's a fare amout of lateral resistance. Just my thoughts. I know I said it first off, Very Cool!!!
Thanx for the kind words nuffer.
I try to make things look "store bought", if you will.
I flubbed a notch today, time to go get another couple
sticks of tube...
There are 2 kinds of guys who bend cages. Those who
screw up and those whom are going to screw up!
Notching is not for sissies! It is tough!
I try to make things look "store bought", if you will.
I flubbed a notch today, time to go get another couple
sticks of tube...
There are 2 kinds of guys who bend cages. Those who
screw up and those whom are going to screw up!
Notching is not for sissies! It is tough!
Dude my welder is tied up. I am SO tempted to grab my MIG
gun but I want him to do it. His welds are just beautiful. I am
done. It needs welding is all. I have it all fit up, it is "almost"
perfect. Well, actually since all parts are with .05" of each other
what I see as un-perfect is actually the canopy I think, itis no biggy.
gun but I want him to do it. His welds are just beautiful. I am
done. It needs welding is all. I have it all fit up, it is "almost"
perfect. Well, actually since all parts are with .05" of each other
what I see as un-perfect is actually the canopy I think, itis no biggy.
Welding is done... Fit after welding went better than expected.
Here are a few picks, 2 bolts in every joint and 1" pins in.
It Is A Whole New Tractor....Oh man...it is SO EASY to get in and out now!
I am VERY Pleased! :yes:
I will prob him-haw over it for a while, re-think fire-x amd chainsaw mounts
before I disassembly and paint.
The above parts weigh 59.5Lbs
There is another pair of U-Bolts for the rear anchor. These U-Bolts are tougher
than a 1ton Trucks Axle, 4 are WAY strong enough.
Here are a few picks, 2 bolts in every joint and 1" pins in.
It Is A Whole New Tractor....Oh man...it is SO EASY to get in and out now!
I am VERY Pleased! :yes:
I will prob him-haw over it for a while, re-think fire-x amd chainsaw mounts
before I disassembly and paint.
The above parts weigh 59.5Lbs
There is another pair of U-Bolts for the rear anchor. These U-Bolts are tougher
than a 1ton Trucks Axle, 4 are WAY strong enough.
