BXpanded Hydraulic Pressure Test Kit

[J_J]

Slice,

It is simply about pressure which produces the force, and the GPM's that deal with how fast the hydraulics move. One has to be careful about playing with the pressure. Some of those hyd pumps are very expensive.

 

[Tachdriver]

Will that BX kit work with the new 2011 bx-25 models also ?

Hydraulic Pressure Testers



later

 

[aczlan]

Will that BX kit work with the new 2011 bx-25 models also ?
Hydraulic Pressure Testers

It will tell you the pressure unless Kubota has changed the fittings (which would surprise me). No idea on the shims from that kit though. I would email them and ask.

Aaron Z

 

[BXpanded]

Will that BX kit work with the new 2011 bx-25 models also ?

Hydraulic Pressure Testers



later

Yes it will.

 

[sw03]

Gonna have to buy one of these things

 

[thavil]

Gonna have to buy one of these things

Too funny! You posted something very similar a year ago on this same thread. Reminds me of myself about a toothbar. I waited over a year to buy one. You'll love the difference in FEL power if you happen to be low.

 

[Code54]

Will this work on any series tractor or just the BX (L perhaps)

 

[yooper jim]

Why not make your own for $40.04? Try Discount Hydralic Hose.
Parts:
701-04-04S | 1/4" Female Coupler x 1/4" NPTF Female (Steel) 8.32 (Loader)
702-04-04S | 1/4" Male Coupler x 1/4" NPTF Female (Steel) 4.07 (Remotes)
AFC-3M-25 | Bottom-Mounted Pressure Gauge, 0 to 3,000 psi 17.50
Shipping USP $14.15

Allows you to check either male or female fittings. Shims are $.35 at Messick's and come in different thicknesses (.01mm .02mm and .04mm). I think pressure boost is 39 psi/.01mm shim.

 

[sw03]

Too funny! You posted something very similar a year ago on this same thread. Reminds me of myself about a toothbar. I waited over a year to buy one. You'll love the difference in FEL power if you happen to be low.

LOL..I hear ya..I am a slow old man I guess! The FEL WILL pickup whatever and raise the rear (with BH)...The BH needs some work...I just wish there was a simple test to see!!!

Too many people think the BX22/23/24/25 are a little machine.. They are wrong.

 

[sw03]

Why not make your own for $40.04? Try Discount Hydralic Hose.
Parts:
701-04-04S | 1/4" Female Coupler x 1/4" NPTF Female (Steel) 8.32 (Loader)
702-04-04S | 1/4" Male Coupler x 1/4" NPTF Female (Steel) 4.07 (Remotes)
AFC-3M-25 | Bottom-Mounted Pressure Gauge, 0 to 3,000 psi 17.50
Shipping USP $14.15

Allows you to check either male or female fittings. Shims are $.35 at Messick's and come in different thicknesses (.01mm .02mm and .04mm). I think pressure boost is 39 psi/.01mm shim.

True, but then I have to order from (2) places etc. It is one stop shopping and for the delta in price..:thumbsup: