Mowing Can't lock mmm to top position on bx2360

   / Can't lock mmm to top position on bx2360
  • Thread Starter
#11  
I think that's a big benefit of TBN - all of the veterans are patient with us newbies.
 
   / Can't lock mmm to top position on bx2360 #13  
Have a new BX2360 with MMM, FEL and rototiller. I have 6 acres, mostly grass and intend to have a 1/4-1/2 acre garden. I'll also be doing lots of landscaping and building a garage. My problem is that I can't get the dial on the MMM to turn all the way to the "TOP" indicator. I see this as important for next spring hen I'll be tilling up the garden. Is there some trick not well documented in the manual, or should I address the problem with my dealer. I really don't want to detach the mower if I don't have to.


Tim,

I know taking that deck off/on isn't the most pleasant chores in the world, but I sure don't care to run the tiller etc. with that joker hanging under the tractor. Wear and tear not to mention the extra weight can be a hassle.

Believe it or not, it gets easier the more you do it. On the positive side, it's a good way to get a good thourough inspection of the deck, blades, pullies and bearings.
 
   / Can't lock mmm to top position on bx2360
  • Thread Starter
#14  
Big dad,

I don't have a flat surface (yet - have to build a garage!) but when I do I plan on it. Hopefully i get it done before spring and gardening season. If not, maybe a couple of sheets of plywood will suffice in the mean time. I really have to get the garage done, don't like keeping the BX2360 under a tarp.
 
   / Can't lock mmm to top position on bx2360 #15  
Tim,

Oooooohhhhkay...... I can see why. It sure is much easier and safer on a nice flat spot.

Good luck!
 
   / Can't lock mmm to top position on bx2360
  • Thread Starter
#16  
Oh, and did I mention the wife also wants the cars under shelter? Another reason for building the garage.
 
   / Can't lock mmm to top position on bx2360 #17  
We have a concrete drive we use to remove the deck on our BX, but not JD2305 and a piece of plywood, particle board or just a couple of wide boards work pretty well also. My sons have pulled them both off in grass and rock, but they are pretty strong. It can be done, but I don't recommend it.
 

Tractor & Equipment Auctions

2001 Blue Bird Commercial Portable Office Bus (A51692)
2001 Blue Bird...
500 BBL WHEELED FRAC TANK (A55745)
500 BBL WHEELED...
2013 Ford F-550 Ext. Cab 4x4 Auto Crane 6406H 6,400LB Crane Service Truck (A53422)
2013 Ford F-550...
CATERPILLAR 108" WHEEL LOADER RAKE (A52707)
CATERPILLAR 108"...
DIRT DOG CBX60 60" BOX BLADE (A57192)
DIRT DOG CBX60 60"...
2000 Kenworth W900 - 3406E CAT Engine - 78,980 Miles (A52748)
2000 Kenworth W900...
 
Top