Case JX75T vs New Holland TD80 which one to buy?
- Thread starter Tomtomy
- Start date
- Views: 1072
-
- Tags
- case new holland
Sawyer Rob
Super Member
That's easy, which one has the best dealer, and maybe even the better price.
SR
SR
Do you
Do you mean I don't have to worry about performance and specifications?
careyo63
Elite Member
- Joined
- Jan 6, 2012
- Messages
- 2,695
- Tractor
- 77 Yanmar YM2000 63 Ford 2000
You always have to worry about Spec. and Perf.. The Maint. and repairs, Parts etc. availability in your location. Either doesn't have as many as your Deere.
BleedingOrange
Elite Member
- Joined
- Apr 19, 2011
- Messages
- 2,868
- Tractor
- Kubota BX 2370
To general a question. Depends on what are the main uses you are going to use the tractor for ? Maybe add some of that info, and you might get better answers.
EddieWalker
Epic Contributor
I'm not familiar with either model, but isn't Case and New Holland the same thing, just different paint and trim?
If the HP is the same, and the drivetrain is the same, then one isn't better than the other.
I know that in other Case models, the C version is a lot better than the A version, but it's a lot more money too.
Given the two choices, I would buy the one with the best Parts and Service Department close to me.
If the HP is the same, and the drivetrain is the same, then one isn't better than the other.
I know that in other Case models, the C version is a lot better than the A version, but it's a lot more money too.
Given the two choices, I would buy the one with the best Parts and Service Department close to me.
Sawyer Rob
Super Member
Do you mean I don't have to worry about performance and specifications?
Not so much with those two tractors, as for what they will do, they just aren't that far apart.
SR
Not so much with those two tractors, as for what they will do, they just aren't that far apart.
SR
Thanks guys, Case 75hp, NH 80hp, not a big change really. I go for the dealer close to me.
EddieWalker
Epic Contributor
Do they both use DEF? I bought a 70 hp tractor because I didn't want DEF. I originally wanted 80 hp so I could pull a 15 foot batwing, but it wasn't all that hard to talk myself into a 12 foot batwing to avoid DEF.
dieselscout80
Veteran Member
Do both have: wet clutch, power reverser and power shift (full or partial)?
Those would be some important things for me.
One other is speed in specific ranges. An example is if you’re mowing at say 4mph in the lowest speed gear in a range and you have to downshift you likely will have to stop (not a issue with a full power shift/CVT) to shift ranges.
Those would be some important things for me.
One other is speed in specific ranges. An example is if you’re mowing at say 4mph in the lowest speed gear in a range and you have to downshift you likely will have to stop (not a issue with a full power shift/CVT) to shift ranges.
