Loader Chain hooks on loader

   / Chain hooks on loader #31  
I have three on my loader, and one on each of my bh buckets. I also put one on my brother's loader for him.

Real good stuff...real good guy to deal with.
 
   / Chain hooks on loader
  • Thread Starter
#32  
I was looking at my quick attach bucket on the la525 and the plate that is welded across the top is not even with the front of bucket. It appears that the bolt on hook will not sit flush at front of bucket. It would have to be moved back a bit. Then the under side looks like it would be drilled right through the weld seam?? Anyone else tackle this issue on this loader?
 
   / Chain hooks on loader #33  
I was looking at my quick attach bucket on the la525 and the plate that is welded across the top is not even with the front of bucket. It appears that the bolt on hook will not sit flush at front of bucket. It would have to be moved back a bit. Then the under side looks like it would be drilled right through the weld seam?? Anyone else tackle this issue on this loader?

This has not been an issue for MANY customers.

image.jpeg

image.jpeg

image.jpeg

image.jpeg
 
   / Chain hooks on loader
  • Thread Starter
#34  
Thanks kennyd. I got my order in for a couple grab hooks and a drill bit.
 
   / Chain hooks on loader #36  
<snip>
The lip itself is not strong enough, so do not hook chains to it (not to mention that the size/shape of the lip is not right for any chain hooks I have ever seen).
The "lip" on the bucket of my M4700 FEL fits the hook of a chain just fine.
attachment.php


And you can tell by the crenulated surface others have proven it is NOT strong enough for heavy loads :)
 

Attachments

  • IMG_20151203_112002182_HDR.jpg
    IMG_20151203_112002182_HDR.jpg
    428.4 KB · Views: 1,948
   / Chain hooks on loader #37  
The "lip" on the bucket of my M4700 FEL fits the hook of a chain just fine.
451372d1450825693-chain-hooks-loader-img_20151203_112002182_hdr-jpg


And you can tell by the crenulated surface others have proven it is NOT strong enough for heavy loads :)

Crenulated...I just learned a new word!

Anyway, that is why I welded a pipe under the lip. Unfortunately, that would make hooking the grab hooks as in the photo not possible.
 
   / Chain hooks on loader #38  
I have 3 weld on grab hooks and 2 bolt on slip hooksHPIM1477.JPG
 
   / Chain hooks on loader #39  
I have the same loader as you. The bolt ons from Kenny worked perfectly. ImageUploadedByTapatalk1452371521.294810.jpg

I also added a Clevis inside the bucket center for a 1/2 inch shackle but am planning on adding another one on the rear outside of the bucket sandwiching the bucket body.

Here's a tip. When you try to get the nut and washers inside the SSQA mount, stack them all up on an Allen wrench with a couple of fingers holding it up through the bolt hole. Then push the bolt down through the washers and start it in the nut which you are holding up with your fingertips. Switch to a wrench to hold it and tighten down.
ImageUploadedByTapatalk1452371855.194260.jpg
 
   / Chain hooks on loader
  • Thread Starter
#40  
Thanks for the pics and tip. I was thinking it was going to be fun trying to get the washers and nut on.
 

Tractor & Equipment Auctions

2018 JLG 3246ES 32FT. Electric Scissor Lift (A49346)
2018 JLG 3246ES...
2018 Nissan Pathfinder SUV (A50324)
2018 Nissan...
2012 Mack GU713 Tri-Axle 16FT Ox Bodies Dump Truck (A48081)
2012 Mack GU713...
2020 Kubota Z723KH 48in. Zero Turn Commercial Mower (A50324)
2020 Kubota Z723KH...
2015 Chevrolet Cruze 1LT Sedan (A48082)
2015 Chevrolet...
2014 Utility Trailer 4000DX 53ft. T/A Dry Van Trailer (A48081)
2014 Utility...
 
Top