chop saw
- Thread starter mechanic
- Start date
- Views: 7142
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
I have the 14 in Dewalt metal cutting saw. Does an excellent job. I also have the 8 in Milwaukee metal cutting saw.
Last edited:
TnWV
Platinum Member
- Joined
- Apr 29, 2008
- Messages
- 589
- Location
- Liberty,WV - Putnam Co.
- Tractor
- 2003 Zetor 4341 w/FEL, 1970 MF 150, 2012 JD X530
I have a 10" Hitachi that I bought new at Lowes 5 years ago. It has cut a ton of 3/4 hardwood floor, vinyl floor, PVC pipe, 2X4, 2X6, etc. And been loaned out to multiple friends. Still on original blade and I have no complaints. Only cost about $129 I think. Also have an 18 volt Hitachi Drill Set about the same age with no problems.
moored4
Veteran Member
- Joined
- Jan 31, 2011
- Messages
- 2,359
- Tractor
- Kubota l245dt, l3540, 8N
I have a 14 inch milwaukee chop saw. It is a nice saw and have not had any problems with it!
Last edited:
Birdhunter1
Veteran Member
I have the 14" Hitachi chop saw and I have cut alot of stuff with it with no complaints.
BHD
Veteran Member
I lilke my Dewalt
GE222
Gold Member
I believe that you will be satisfied with any better quality tool, such as Milwaukee, DeWalt, Makita, Bosch, Hitachi, etc.. You get what you pay for with Harbor Freight.
Travelover
Elite Member
I know that you don't want to consider HF, but be aware that they have three different qualities of their chop saw. I bought the best one and once I installed a brand name blade, it works great.
3-1/2 Horsepower 14" Industrial Cut-Off Saw
3-1/2 Horsepower 14" Industrial Cut-Off Saw
bironacad
Platinum Member
14" Makita mitre saw, over twenty years old, never used to cut metal though, lol.
paulwestski
Gold Member
Yeah there's two different kids of chop saws.
A cut off saw also referred to as a chop saw for cutting metal most commonly using an abrasive blade. Then there is a miter saw also referred to as a chop saw for cutting wood, plastics, aluminum extrusions and using a toothed blade.
They do make cut off saws for cutting metal that have toothed blades but they are pricey.
Are you going to use it every day to make money with or just occasionally at the shop?
Depending on how much you can save consider the Harbor freight saw and buy the extended warranty.
A cut off saw also referred to as a chop saw for cutting metal most commonly using an abrasive blade. Then there is a miter saw also referred to as a chop saw for cutting wood, plastics, aluminum extrusions and using a toothed blade.
They do make cut off saws for cutting metal that have toothed blades but they are pricey.
Are you going to use it every day to make money with or just occasionally at the shop?
Depending on how much you can save consider the Harbor freight saw and buy the extended warranty.
Here are some similar links:
