Cleaning up Brush with the 45

   / Cleaning up Brush with the 45 #21  
Sorry, I do remember that. It's a little difficult getting that done the first few times!
John
 
   / Cleaning up Brush with the 45 #22  
Sorry, I do remember that. It's a little difficult getting that done the first few times!
John
 
   / Cleaning up Brush with the 45 #23  
Hey, that tractor has a sunroof /forums/images/graemlins/smile.gif
That grapple is too cool.
Tom
 
   / Cleaning up Brush with the 45 #24  
Hey, that tractor has a sunroof /forums/images/graemlins/smile.gif
That grapple is too cool.
Tom
 
   / Cleaning up Brush with the 45
  • Thread Starter
#25  
Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. /forums/images/graemlins/blush.gif
 
   / Cleaning up Brush with the 45
  • Thread Starter
#26  
Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. /forums/images/graemlins/blush.gif
 
   / Cleaning up Brush with the 45 #27  
</font><font color="blue" class="small">( Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. )</font>
I've nearly destroyed the entrance to my shed by forgetting the ROPS is up! You've had better luck.
John
 
   / Cleaning up Brush with the 45 #28  
</font><font color="blue" class="small">( Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. )</font>
I've nearly destroyed the entrance to my shed by forgetting the ROPS is up! You've had better luck.
John
 
   / Cleaning up Brush with the 45 #29  
Are you using the rear remote for the grapple? How are you operating it (controls)? New joystick? Telllllll Meeeee.... /forums/images/graemlins/grin.gif
 
   / Cleaning up Brush with the 45 #30  
Are you using the rear remote for the grapple? How are you operating it (controls)? New joystick? Telllllll Meeeee.... /forums/images/graemlins/grin.gif
 

Tractor & Equipment Auctions

2015 MACK GU713 WINCH TRUCK (INOPERABLE) (A50854)
2015 MACK GU713...
TRUCKING INFO (A50775)
TRUCKING INFO (A50775)
2011 L3 GENERATOR SET (A51222)
2011 L3 GENERATOR...
Fifth wheel multi use trailer. (A51039)
Fifth wheel multi...
2018 CATERPILLAR D8T HI-TRACK CRAWLER DOZER (A51242)
2018 CATERPILLAR...
2025 JMR 36in Mini Skid Steer Bucket Attachment (A50322)
2025 JMR 36in Mini...
 
Top