Cleaning up Brush with the 45

   / Cleaning up Brush with the 45 #21  
Sorry, I do remember that. It's a little difficult getting that done the first few times!
John
 
   / Cleaning up Brush with the 45 #22  
Sorry, I do remember that. It's a little difficult getting that done the first few times!
John
 
   / Cleaning up Brush with the 45 #23  
Hey, that tractor has a sunroof /forums/images/graemlins/smile.gif
That grapple is too cool.
Tom
 
   / Cleaning up Brush with the 45 #24  
Hey, that tractor has a sunroof /forums/images/graemlins/smile.gif
That grapple is too cool.
Tom
 
   / Cleaning up Brush with the 45
  • Thread Starter
#25  
Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. /forums/images/graemlins/blush.gif
 
   / Cleaning up Brush with the 45
  • Thread Starter
#26  
Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. /forums/images/graemlins/blush.gif
 
   / Cleaning up Brush with the 45 #27  
</font><font color="blue" class="small">( Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. )</font>
I've nearly destroyed the entrance to my shed by forgetting the ROPS is up! You've had better luck.
John
 
   / Cleaning up Brush with the 45 #28  
</font><font color="blue" class="small">( Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. )</font>
I've nearly destroyed the entrance to my shed by forgetting the ROPS is up! You've had better luck.
John
 
   / Cleaning up Brush with the 45 #29  
Are you using the rear remote for the grapple? How are you operating it (controls)? New joystick? Telllllll Meeeee.... /forums/images/graemlins/grin.gif
 
   / Cleaning up Brush with the 45 #30  
Are you using the rear remote for the grapple? How are you operating it (controls)? New joystick? Telllllll Meeeee.... /forums/images/graemlins/grin.gif
 

Tractor & Equipment Auctions

2011 4300M7 International (Pavo, GA) (A50123)
2011 4300M7...
JMR stump/trenching bucket (A53421)
JMR...
2012 Chevrolet Silverado 3500 HD Enclosed Service Truck (A53422)
2012 Chevrolet...
2011 INTERNATIONAL DURASTAR 4400 (A53843)
2011 INTERNATIONAL...
2007 International 4400 2,000 Gallon Water Truck (A52377)
2007 International...
2002 TOYOTA 7FDKU40 FORKLIFT (A54607)
2002 TOYOTA...
 
Top