Cleaning up Brush with the 45

   / Cleaning up Brush with the 45 #21  
Sorry, I do remember that. It's a little difficult getting that done the first few times!
John
 
   / Cleaning up Brush with the 45 #22  
Sorry, I do remember that. It's a little difficult getting that done the first few times!
John
 
   / Cleaning up Brush with the 45 #23  
Hey, that tractor has a sunroof /forums/images/graemlins/smile.gif
That grapple is too cool.
Tom
 
   / Cleaning up Brush with the 45 #24  
Hey, that tractor has a sunroof /forums/images/graemlins/smile.gif
That grapple is too cool.
Tom
 
   / Cleaning up Brush with the 45
  • Thread Starter
#25  
Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. /forums/images/graemlins/blush.gif
 
   / Cleaning up Brush with the 45
  • Thread Starter
#26  
Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. /forums/images/graemlins/blush.gif
 
   / Cleaning up Brush with the 45 #27  
</font><font color="blue" class="small">( Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. )</font>
I've nearly destroyed the entrance to my shed by forgetting the ROPS is up! You've had better luck.
John
 
   / Cleaning up Brush with the 45 #28  
</font><font color="blue" class="small">( Yesterday I drove the tractor into the shed with the sunroof still up, fortunately it's on cylinders to raise and lower it and so had some spring to it, no damage done but I wondered what that thumping noise was when I drove under the roof trusses. The shed is 30x40x8 so there is not much head room. )</font>
I've nearly destroyed the entrance to my shed by forgetting the ROPS is up! You've had better luck.
John
 
   / Cleaning up Brush with the 45 #29  
Are you using the rear remote for the grapple? How are you operating it (controls)? New joystick? Telllllll Meeeee.... /forums/images/graemlins/grin.gif
 
   / Cleaning up Brush with the 45 #30  
Are you using the rear remote for the grapple? How are you operating it (controls)? New joystick? Telllllll Meeeee.... /forums/images/graemlins/grin.gif
 

Tractor & Equipment Auctions

2008 Chevrolet Express Box Truck (A56858)
2008 Chevrolet...
Tandem Axle Rear Trailer Frame (A55851)
Tandem Axle Rear...
SKID STEER ATTACHMENT CEMENT MIXER (A58214)
SKID STEER...
CAT D5G LGP DOZER (A58214)
CAT D5G LGP DOZER...
2000 PETERBILT 379 MID-ROOF SLEEPER (A58214)
2000 PETERBILT 379...
2016 CATERPILLAR 304E2 EXCAVATOR (A52709)
2016 CATERPILLAR...
 
Top