oscer
Silver Member
Hi fellas,
I built a ballast box today for about $60. Made a frame out of 2x2x1/4 angle then formed it with 1/2" plywood and filled with 9
bags of concrete mix. I'm anxious to try it out in a day or two.
According to my owners manual a 4110 with loaded r4s needs
725# min. If I figured right this unit should weigh in at close to
800. I'm not sure how much JD gets for theirs but I'll bet I saved
a bunch of money.
I built a ballast box today for about $60. Made a frame out of 2x2x1/4 angle then formed it with 1/2" plywood and filled with 9
bags of concrete mix. I'm anxious to try it out in a day or two.
According to my owners manual a 4110 with loaded r4s needs
725# min. If I figured right this unit should weigh in at close to
800. I'm not sure how much JD gets for theirs but I'll bet I saved
a bunch of money.