Buying Advice Considering purchasing a JD 1120

   / Considering purchasing a JD 1120 #11  
It would be interesting to know the manufacturer of the aftermarket power steering kit.
 

Attachments

  • Screenshot 2021-05-07 111551.png
    Screenshot 2021-05-07 111551.png
    314.9 KB · Views: 213
   / Considering purchasing a JD 1120
  • Thread Starter
#12  
It would be interesting to know the manufacturer of the aftermarket power steering kit.

It’s marked Anadolu.

I think it’s this kit

 
   / Considering purchasing a JD 1120 #13  
I think you're correct on kit brand. I would definitely consider that kit if I had a JD utility tractor with manual steering. I wonder if that kit would operate on a JD utility tractor with faulty power steering? It's unfortunate that this aftermarket power steering kit can't be used on tractors with FEL.
 
Last edited:
   / Considering purchasing a JD 1120
  • Thread Starter
#14  
I think you're correct on kit brand. I would definitely consider that kit if I had a JD utility tractor with manual steering. I wonder if that kit would operate on a JD utility tractor with faulty power steering? It's unfortunate that this aftermarket power steering kit can't be used on tractors with FEL.

That last sentence is why I’ll likely sell this tractor to help fund something with a loader.
 
   / Considering purchasing a JD 1120 #15  
I think maybe a select few loaders such as a model 36 that attach to tractor frt support & rear axles might fit your tractor. There are a few aftermarket FEL's that mount similarly to utility tractors.
 

Attachments

  • Screenshot 2021-05-08 063104.png
    Screenshot 2021-05-08 063104.png
    134.1 KB · Views: 187
   / Considering purchasing a JD 1120
  • Thread Starter
#16  
So the radiator didn’t do the trick.

It was still running quite warm.


I found the culprit and replaced it!


Now it’s hard to to get it hot on a cool evening.

I’ll mow tomorrow in the 90s so we shall see.


IMG_6596.JPG
IMG_6597.JPG
IMG_6593.JPG
IMG_6595.JPG
IMG_6592.JPG
 
   / Considering purchasing a JD 1120
  • Thread Starter
#17  
Mowed for 6 hours today.

Temp stayed right at 170-180 despite it being 90 degrees and running at full pto rpm for a good cut.

View attachment 699596
 

Attachments

  • IMG_6607.JPG
    IMG_6607.JPG
    2.7 MB · Views: 188
   / Considering purchasing a JD 1120
  • Thread Starter
#18  
IMG_6608.jpg
 
   / Considering purchasing a JD 1120 #19  
I am guessing aftermarket temp gauge.
On my 2030 the temp gauge has no numbers. Typical is one to two needle widths to the left of straight up. Red zone is to far right.
 
   / Considering purchasing a JD 1120
  • Thread Starter
#20  
Yes I bought the aftermarket gauge at Advance Auto Parts awhile back.
 

Tractor & Equipment Auctions

TANK (A48992)
TANK (A48992)
Carrier AC Reefer Truck Engine (A49346)
Carrier AC Reefer...
2013 Crane Carrier Co. Low Entry Loadmaster Excel-S 25 Yard Rear Loader Garbage Truck (A48081)
2013 Crane Carrier...
2016 KENWORTH T680 TANDEM AXLE SLEEPER (A50046)
2016 KENWORTH T680...
377890 (A48837)
377890 (A48837)
Waco 32" Digging Bucket, approximately 80mm pins (A47371)
Waco 32" Digging...
 
Top