Converting Pin on to SSQA, adding/mounting QC couplers to replace hard connected hoses.

   / Converting Pin on to SSQA, adding/mounting QC couplers to replace hard connected hoses. #1  

joea99

Platinum Member
Joined
Sep 8, 2014
Messages
671
Location
Marbletown NY
Tractor
Kubota B21, JD 240GT
Getting ready to convert pin on FEL 4n1 bucket (Wr Long on Kubota B21), which has "hard connected" lines from the solenoid valve to the 4n1 jaw cylinders, to SSQA.

Obviously, the thing to do is add QC couplers, And replace the well abused original hoses. I bought it that way, in case you wonder. I see the WR long kits come with QC couplers, but maybe they did not "back then".

Looking for examples of how others have mounted the QC couplers so I can have lots of options to befuddle my aging brain. Further.

Just want to try and avoid excessive down time and scrounging up of parts, etc.
 

Tractor & Equipment Auctions

2015 CATERPILLAR 272D2 WHEELED SKID STEER (A50458)
2015 CATERPILLAR...
2018 Ford F-450 Crew Cab Knapheide Service Truck (A49461)
2018 Ford F-450...
CATERPILLAR 304E CR EXCAVATOR (A51242)
CATERPILLAR 304E...
HEAVYEQUIPMENT ROLLS OF CONDUIT (A50854)
HEAVYEQUIPMENT...
1274 (A50490)
1274 (A50490)
Grady-White 17ft Fishing Boat with T/A Boat Trailer (A50324)
Grady-White 17ft...
 
Top