Disassembling 7360ss shift linkage

   / Disassembling 7360ss shift linkage #1  

VetFan

New member
Joined
Aug 31, 2018
Messages
2
Location
Mims, Florida
Tractor
Cub Cadet 7360ss
Got both cub cadet manuals. Pics indicate a cover on side of center case, labeled "Lever holder" 4 bolts appear to hold it on and I removed them, but short of destroying it, it refuses to come off and the pics are zero help. I disconnected all external linkage, shift is in neutral. Pics look as if it should come up and off, I would gladly welcome any help. The slide lever is leaking about a gallon of hyd. fluid every 2-3 days even while sitting.
 
   / Disassembling 7360ss shift linkage #2  
The shifter on my 7260 SS works good when it's warm outside, but gets hard to go into fwd or rev when it's cold. I haven't found any lub points. Anyone else with the same problem or suggestions to fix. Was also very hard to start the engine when it's cold, so I put the glow plugs on a manual system with a switch and a 180 amp fuse directly from the battery to the glow plugs. Turn it on for 8 seconds, starts every time.
 

Tractor & Equipment Auctions

2015 Chevrolet Silverado 2500HD (A51039)
2015 Chevrolet...
DRILLING CABINET (A50854)
DRILLING CABINET...
2007 Freightliner Columbia 120 - Class 8, 6x4, Mercedes MBE4000 Diesel (A51039)
2007 Freightliner...
2021 TAKEUCHI TL6R SKID STEER (A51242)
2021 TAKEUCHI TL6R...
2017 GENIE GTH-636 TELESCOPIC FORKLIFT (A51242)
2017 GENIE GTH-636...
Husky GHM105890 Cement Mixer (A49461)
Husky GHM105890...
 
Top