jgh
Gold Member
- Joined
- Apr 25, 2000
- Messages
- 492
- Location
- Goochland & Fluvanna Counties, VA
- Tractor
- NH TN90F; B3000 Kubota; Bobcats 430 & A300; Liebherr 621C, Exmark laser Z, 2 sawmills
20060613
If your tractor is getting pushed around by a 3ph machine, I'd seriously consider a pull type or a larger tractor. We have hills and that does not sound really safe. My 1411 NH does just fine with my NH TN90F, which you (Renze) may see more of in Europe than here--narrow vineyard machine, now with wheel weights and dished out to more width due to our hills.
But it is heavy enough (8K+ with FEL and cab) to swing that 1411 around like a toy when I need to. Only time I feel unsafe is if I get on too much of a slope /forums/images/graemlins/frown.gif
Have an accident or break something on your tractor bell housing and that 3 PH cutter will seem really expensive. Caution will robinson.
Just my 2¢ worth,
J
If your tractor is getting pushed around by a 3ph machine, I'd seriously consider a pull type or a larger tractor. We have hills and that does not sound really safe. My 1411 NH does just fine with my NH TN90F, which you (Renze) may see more of in Europe than here--narrow vineyard machine, now with wheel weights and dished out to more width due to our hills.
But it is heavy enough (8K+ with FEL and cab) to swing that 1411 around like a toy when I need to. Only time I feel unsafe is if I get on too much of a slope /forums/images/graemlins/frown.gif
Have an accident or break something on your tractor bell housing and that 3 PH cutter will seem really expensive. Caution will robinson.
Just my 2¢ worth,
J