DIY Snowcat build

   / DIY Snowcat build
  • Thread Starter
#11  
Super sketchy trial run.
IMG_3367.jpeg

Found some galvanized steel at the dump and used it to tub the frame.
IMG_3400.jpeg

Smooth bottom to slide over snow better.
IMG_3399.jpeg


IMG_3437.jpeg
 
   / DIY Snowcat build
  • Thread Starter
#12  
About four months after starting it was going around my yard. Everything worked. Sprockets were initially very rudimentary and track tension was too loose. Had a new belt on that was squealing a bit.

Home Built Snowcat test
 
   / DIY Snowcat build
  • Thread Starter
#13  
Walls are thin fiberglass reinforced plastic. Cheap, light.
IMG_3481.jpeg


Early trial run. Still had long exhaust from snowmobile. Cooling fans found to be unnecessary.
IMG_3811.jpeg


Rebuilt a new chain drive system with better bearings.
IMG_3822.jpeg
 
   / DIY Snowcat build
  • Thread Starter
#14  
Sprocket replaces ring gear in this scenario.

Chain drive differential

First version that changed this winter.

 
   / DIY Snowcat build
  • Thread Starter
#15  
Neighborhood testing.
IMG_3989.jpeg


Prior to gear reduction.

1.25” grousers have their limitations but are a lot easier to turn.#snowcat #trackedvehicle
 
   / DIY Snowcat build
  • Thread Starter
#16  
After gear reduction. Busting drifts in the spring about 8 miles back in the mountains.

Helping a friend gain access to his remote mountain cabin.
Last day of the year. Tearing it down to the nub to recoat the frame, etc etc.
 
   / DIY Snowcat build
  • Thread Starter
#17  
This summer I’m cleaning up the wiring, fabrication of new muffler, making final output shaft 2” diameter hardened steel vs 1” el-cheapo that I snapped. Working on the very spartan interior. Rebuilding new polyurethane sprockets.

Will also fabricate new six way blade with tilt function to better level ski trails. Oh, and fabricating a new drag for grooming.

Plenty to do
 
   / DIY Snowcat build #18  
Wow, looks like a lot of work, must be a labor of love. Some questions,

Is the cab heated ?
Where did you get that differential from?

Richard
 
   / DIY Snowcat build #19  
Ok, you just got another subscriber for your YouTube channel!
Fantastic stuff👍
And I was right in my first post, your too modest and my hat's off to you and your build!
 
   / DIY Snowcat build
  • Thread Starter
#20  
Wow, looks like a lot of work, must be a labor of love. Some questions,

Is the cab heated ?
Where did you get that differential from?

Richard
Diesel heater in cab. Diff is from 1 ton Chevy.
 

Tractor & Equipment Auctions

2023 Chevrolet Tahoe FL SUV (A55853)
2023 Chevrolet...
2025 JMR Tree Boom Skid Steer Attachment (A53421)
2025 JMR Tree Boom...
Mahindra 4550-4L Tractor with Front Loader - 49 HP, 4WD, Heavy-Duty Utility (A55302)
Mahindra 4550-4L...
2017 Ford F-550 Enclosed Service Truck (A53422)
2017 Ford F-550...
2013 SHOP BUILT FLARE STACK (A53843)
2013 SHOP BUILT...
2025 Single Cylinder 40in Grapple Rake Mini Skid Steer Attachment (A53421)
2025 Single...
 
Top