DIY Snowcat build

   / DIY Snowcat build
  • Thread Starter
#11  
Super sketchy trial run.
IMG_3367.jpeg

Found some galvanized steel at the dump and used it to tub the frame.
IMG_3400.jpeg

Smooth bottom to slide over snow better.
IMG_3399.jpeg


IMG_3437.jpeg
 
   / DIY Snowcat build
  • Thread Starter
#12  
About four months after starting it was going around my yard. Everything worked. Sprockets were initially very rudimentary and track tension was too loose. Had a new belt on that was squealing a bit.

Home Built Snowcat test
 
   / DIY Snowcat build
  • Thread Starter
#13  
Walls are thin fiberglass reinforced plastic. Cheap, light.
IMG_3481.jpeg


Early trial run. Still had long exhaust from snowmobile. Cooling fans found to be unnecessary.
IMG_3811.jpeg


Rebuilt a new chain drive system with better bearings.
IMG_3822.jpeg
 
   / DIY Snowcat build
  • Thread Starter
#14  
Sprocket replaces ring gear in this scenario.

Chain drive differential

First version that changed this winter.

 
   / DIY Snowcat build
  • Thread Starter
#15  
Neighborhood testing.
IMG_3989.jpeg


Prior to gear reduction.

1.25” grousers have their limitations but are a lot easier to turn.#snowcat #trackedvehicle
 
   / DIY Snowcat build
  • Thread Starter
#16  
After gear reduction. Busting drifts in the spring about 8 miles back in the mountains.

Helping a friend gain access to his remote mountain cabin.
Last day of the year. Tearing it down to the nub to recoat the frame, etc etc.
 
   / DIY Snowcat build
  • Thread Starter
#17  
This summer I’m cleaning up the wiring, fabrication of new muffler, making final output shaft 2” diameter hardened steel vs 1” el-cheapo that I snapped. Working on the very spartan interior. Rebuilding new polyurethane sprockets.

Will also fabricate new six way blade with tilt function to better level ski trails. Oh, and fabricating a new drag for grooming.

Plenty to do
 
   / DIY Snowcat build #18  
Wow, looks like a lot of work, must be a labor of love. Some questions,

Is the cab heated ?
Where did you get that differential from?

Richard
 
   / DIY Snowcat build #19  
Ok, you just got another subscriber for your YouTube channel!
Fantastic stuff👍
And I was right in my first post, your too modest and my hat's off to you and your build!
 
   / DIY Snowcat build
  • Thread Starter
#20  
Wow, looks like a lot of work, must be a labor of love. Some questions,

Is the cab heated ?
Where did you get that differential from?

Richard
Diesel heater in cab. Diff is from 1 ton Chevy.
 

Tractor & Equipment Auctions

2016 VOLVO VNL780 SLEEPER (A43003)
2016 VOLVO VNL780...
2018 GENIE GS4047 (A45046)
2018 GENIE GS4047...
2001 MACK CH613 (A45046)
2001 MACK CH613...
JCB 950 MAST FORKLIFT (A45046)
JCB 950 MAST...
7X20 METAL FARM DRIVEWAY GATE (A45046)
7X20 METAL FARM...
2019 KENWORTH T800 DAYCAB (A45046)
2019 KENWORTH T800...
 
Top