MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,934
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
I'm extremely proficient in taking things apart..... :laughing:
Doubt I can get this old Cletrac running...
- Thread starter mopardude318
- Start date
- Views: 30966
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Me too.. and I end up with more than I started even after I put it back together!
fried1765
Super Star Member
- Joined
- Jan 6, 2015
- Messages
- 10,086
- Tractor
- Kubota L48 TLB, Ford 1920 FEL, 8N Ford, Gravely 12 HP "Professional", 48" SCAG Liberty
Wow! agree with diesel... if you get it running, post a video w/sound! I wish I had the time and patience to undertake a project like that. First of all I would need to be a widow... second of all, I still wouldn't attempt it! Hat's off to you!
You might some day unfortunately be a "widower", but it is rather unlikely that you will ever be a "widow".
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Good point. Thanks for the correction!
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,934
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
Ain't that the truth? How many coffe cans of nuts and bolts and odd parts do you have? Where did they come from? I have no idea!
:confused3:
:laughing:
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,934
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
kc5dlo
Gold Member
I enjoyed the thread with the Oliver. Looking forward to even more enjoyment from this thread. Good Luck!
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 24,085
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
I was just going to add with old Flat Head Fords that have sat for a long time it is not uncommon for valves to hand up...
I have had success going one by one to free them up... sometimes on the Model A motors it was nothing more than taking out the valve guides with solvent and scotch pad...
I have had success going one by one to free them up... sometimes on the Model A motors it was nothing more than taking out the valve guides with solvent and scotch pad...
OP
mopardude318
Platinum Member
Alright today I pressure washed the head and intake/exhaust manifold, then did a real quick bead blast job. Good enough. LOL
I cleaned the top of the block, pistons, wiped the bores out and wire wheeled everything. My father is coming over today with a valve spring tool so I can remove the valves. I'll bead blast those too. More to come.
I cleaned the top of the block, pistons, wiped the bores out and wire wheeled everything. My father is coming over today with a valve spring tool so I can remove the valves. I'll bead blast those too. More to come.
MossRoad
Super Moderator
- Joined
- Aug 31, 2001
- Messages
- 57,934
- Location
- South Bend, Indiana (near)
- Tractor
- Power Trac PT425 2001 Model Year
