Draw bar & Hitch Stabilizer vs Triangle hitch titan attachments

[brenth561]

Need help figuring out which would be these option for my New Holland TC18. I am wanting to get an attachment to pull our boat short distances in and out of the flat sloped garage and then also have a rear option to pull small logs and trees. I also plan on purchasing the Harbor Freight Quick Connect.

Which option would provide the most benefit in the long run?

1. Draw Bar with hitch stabilizer such as the EZmover approx $80


2. Titan attachments 3 point hitch with pull ring $109


Titan also makes this one so I figured I could just drill some holes in it similar to the draw bar to add additional hooks but they said it may compromise its strength.


I figure with the draw bar I could add additional hooks and D-rings to it and also use it with other attachments I may require in the future.

or

I could just get a hitch with a D-ring or hook

 

[jeff9366]

Hands Hitch: Tractor Quick Hitch-Cat 1 Quick Hitch | Agri Supply #61559

 

[brenth561]

I looked at that one but I really want one with a 2" hitch receiver.

 

[aeblank]

Do you want it quick hitch compatible?
I got one at Family Farm & Home for about $150. Probably a King Kutter brand.
Quick hitch compatible and it'll do goose neck trailers as well (not that I have one, but maybe one day.......).

 

[LD1]

Any of the options will work just fine for your tractor.

 

[ovrszd]

And yes, you want 2" receiver capability.

 

[brenth561]

Do you want it quick hitch compatible?
I got one at Family Farm & Home for about $150. Probably a King Kutter brand.
Quick hitch compatible and it'll do goose neck trailers as well (not that I have one, but maybe one day.......).

Yes I want it to be quick hitch compatible. I believe both of the Titan triangle type ones are.

 

[aeblank]

The ones you pictured? I don't believe they are.
Usually, the top link must be unobstructed from below.

The top link is on the tab sticking out the back (front?).
http://tinyurl.com/gnx7r7t

 

[brenth561]

The ones you pictured? I don't believe they are.
Usually, the top link must be unobstructed from below.

The top link is on the tab sticking out the back (front?).
http://tinyurl.com/gnx7r7t

Per amazon reviews it will fit the quick hitch but you have to manually put the top link pin in.

 

[lennyzx11]

I have the Titan triangle one and use it most of the time for exactly the same purpose as yours. And carrying a cargo tray. It is bullet proof.


However, I just got a Harbor Freight Quick hitch. I plan on welding a receiver hitch tube under the center of the top hook mount to keep that versatility and gain a quick hitch. The receiver tube cost me 8.95 at the local farm supply. Still have to get the hooks or a D ring to weld on at same time for chains/straps.