DRill press ?

   / DRill press ? #11  
All metal drilling in my drill press is done at 200rpm's and I use "cool tool" cutting oil. Just 1 drop goes a long ways. I never use a small pilot hole when drilling over 1/2" cause that just letts the cutting oil escape .
 
   / DRill press ? #12  
240 RPM is fine for drilling with 1/2" bits into mild steel, aluminum, or stainless. No problem.

The problem is when you want to use bigger bits, or hole saws. I used to use a small benchtop craftsman which I set for it's slowest speed - 600 RPM - and no problem with 1/2" and smaller bits. Once I started using hole saws, that drill press just was very unhappy, and often the saws would get hot enough to temper and the teeth would disappear in a flash. Hand filing a hole saw is a lot of work, but I've done it because i'm cheap.

Last summer I bought a floor standing Delta "X" type drill press for about $950 or so. It's variable speed with levers rather than moving belts around, and it goes down to 150 RPM. I can use a 6" diameter hole saw and bore right through mild steel no problem with the beast. Now that I've fabricated up a small cutting fluid pump thing, and a flexible outlet hose to direct the flow onto the hole saw, I find that the hole saws last a really long time. Instead of two or three holes as before, I can get 30-35 holes using "Ace Hardware" generic hole saws. They are cheap and made by blue mol, a respectable brand.

And I don't use cutting fluid, I use ATF transmission fluid, simply because I have gallons of it sitting around and nothing to pour it into.
 
   / DRill press ? #13  
Mad,
Thanks for the info on Silver and Deming bits. I sort of thought they were a brand name, but from HF ??? I guess they did start out as a brand name, but became a style of bit over time. Sort of like Frigidare I suppose.

Appreciate the education.
Ben
 

Tractor & Equipment Auctions

Bad Boy Outlaw XP 61in Zero Turn Mower (A48082)
Bad Boy Outlaw XP...
2015 MACK GU 713 (A50854)
2015 MACK GU 713...
2025 78in Rock Bucket Skid Steer Attachment (A50322)
2025 78in Rock...
2007 Peterbilt 378 Semi (A50514)
2007 Peterbilt 378...
2014 PJ 24+6 T/A GOOSENECK (A50854)
2014 PJ 24+6 T/A...
2010 CAT 140M MOTORGRADER (A50854)
2010 CAT 140M...
 
Top