Electrical trailer? connector

[bncsauve]

The tractor connector is rectangular with 6 six flat contacts 3 on top in a straight line and 3 on the bottom in a straight line. The connector you show might be a great replacement for the one on the tractor. Thanks

 

[bncsauve]

Well, I took the advice of the forum and added a new 4 pin connector next to the existing one. I moved over the Yellow (option) wire and black (ground). The neat thing about the yellow wire is that there are two connectors in the harness in the dash board that mate up to a switch that I installed in a blank plugged hole in the dash. The harness from Kioti has the two connectors on the yellow wire taped to the harness unless you need them. I can now use the new 4 pin connector to power my spreader and maybe even some work lights switched from the dash. /forums/images/graemlins/grin.gif

 

[Anonymous Poster]

I talked to my dealer about the connector when he delivered my tractor,he said he had an adapter for it.I was just curious after reading this thread.At this point I don't really have any use for it ,but it would be nice to run a set lights for the back.I plan on getting a rear snowblower some day.