Embarrassing loading mistake

[stuckmotor]

This afternoon, I came on two patroll cars with flashing blue lights, two huge wreckers, and two tractor trailers in the middle of a four lane highway. A forklift was transferring the disabled truck's load to the other one. The center of the trailer behind the disabled rig was touching the road . I guess someone put too much weight in the center of the trailer.

 

[3930dave]

I've seen pics of a trailer at the dock, with a forklift through the floor. These new unibody (for lack of a better word) trailers can't seem to take heavy concentrated loads like the old ones.

Same reason tractor trailer wrecks still on the road take longer to clear now. With a heavily loaded unibody trailer, they tend to rip apart if a wrecker tries to flip it upright, w/o the load being emptied.

Progress, I guess.....

Rgds, D.

 

[DT86]

I must say I am disappointed at the lack of pictures.

 

[stuckmotor]

I saw someone using several air bags to right a trailer. This was at the headquarters of the same wrecker company that was about to tow this wreck. It looked like a sales demonstration or a training exercise. Now, I wonder if the trailer was loaded.

 

[stuckmotor]

I must say I am disappointed at the lack of pictures.

The wreck I was driving was making a terrible rackett (loose belts) and I was concentrating on getting by the State Troopers without attracting attention. I wish I'd gotten pictures too.

 

[3930dave]

One example:

Excel Math: Putting pounds on pallets

Doesn't make sense to me, but apparently the bean-counters know better.

Rgds, D.

 

[DT86]

The wreck I was driving was making a terrible rackett (loose belts) and I was concentrating on getting by the State Troopers without attracting attention. I wish I'd gotten pictures too.

LOL, I've been there before. "Be cool, look ahead, don't attract attention"

 

[AndersonFarm]

I saw that happen one time, just west of Nashville on I-40. The driver had apparently tried to haul a steel coil in a van trailer, which is a BIG no no. Those trailers are not designed to handle that much weight in a short span.

 

[stuckmotor]

Dave,
That forklift through the floor is a site. I sure wish I'd gotten a picture of the broken trailer.

 

[3930dave]

Direct link to picture:

http://2.bp.blogspot.com/_3cvpfoj7mb8/TBe7Ko4ea2I/AAAAAAAACYg/RYj0mhGH9SM/s1600/fallen.jpg

The first link had some rough #'s for small forklift weight, as well as the picture.

I hope whoever loaded and drove that steel coil in a regular enclosed trailer was charged with criminal negligence - those coils are scary as **** even when properly secured on a heavy flat deck.

Rgds, D.

 

[stuckmotor]

Dave,
Your first photo came through just fine. When I said it was a "site", I meant it was a "site to behold", not a web site. I forget everyone doesn't talk like Andy Griffith and me.

 

[xtn]

Not being a spelling/grammer **** here... just pointing out that reason for confusion...

That would be a sight to behold, not a site to behold.

xtn

 

[JJZ 109]

I saw someone using several air bags to right a trailer. This was at the headquarters of the same wrecker company that was about to tow this wreck. It looked like a sales demonstration or a training exercise. Now, I wonder if the trailer was loaded.

Saw that done on an episode of Highway Through **** once.
Note: Asterisks above provided courtesy of TBN. I guess the other word for Hades is too vulgar for the site.

 

[ovrszd]

I must say I am disappointed at the lack of pictures.

I'm with ya Derek...

 

[Xfaxman]

Dave,
Your first photo came through just fine. When I said it was a "site", I meant it was a "site to behold", not a web site. I forget everyone doesn't talk like Andy Griffith and me.

Does that mean Andy Griffith couldn't spell "sight" also! :laughing:

 

[stuckmotor]

Thank you XTN. You're right! Sorry.

 

[stuckmotor]

Does that mean Andy Griffith couldn't spell "sight" also! :laughing:

I hope Andy is a better speller than I am.

 

[Bob77064]

Does that mean Andy Griffith couldn't spell "sight" also! :laughing:

Only if he could see it, or would that be sight it?

 

[3930dave]

Thank you XTN. You're right! Sorry.

No worries .... I know how addicted people here are to pics, and in my first linked page I didn't say "scroll down", so I figured I better post a direct link .

Rgds, D.