engine won't turn over

[harryhill]

I have JD X300 with 6 hours on it. I started the mower right back it out and put a snow blade on it, Went to start it and it would not turn over. Battery shows 13. amp. I replace all fuses and relay and it still turn over. Any ideas? Thanks

 

[jel1988]

Check the seat switch!

 

[kevin37b]

I would call the dealer ?

 

[GreenWannabe]

I would check the PTO switch and make sure the brake is on.

 

[zzvyb6]

Take the snow blade back off. Put the mower back on.

Put in neutral, pto off, put 45 lbs on the seat and turn the key. It ought to start then.

 

[deerseeker001]

Welcome from Wisconsin

 

[john_bud]

Sounds like an interlock. Maybe one got a wire knocked loose when the blade was put on?