rvds
Bronze Member
A friend has a craftsman manual transmission that specs EP 00 oil and is not finding it anywhere. I suspect this must be a very common transmission, about 25 years old.
Eagle1
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,320
- Location
- Viburnum, MO
- Tractor
- Kubota BX2200, LS XG3135H, Grasshopper and Yazoo Zturns
Eagle1
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,320
- Location
- Viburnum, MO
- Tractor
- Kubota BX2200, LS XG3135H, Grasshopper and Yazoo Zturns
EP 00 refers to the NLGI viscocity grade (EP=extreme pressure, the numbers refer to its relative viscocity, eg. EP 00, EP 0, EP 1, EP 2, etc. The higher the number the higher the viscocity)
An EP 00 is a very light semi-fluid grease. A lot of blenders will make some greases in that viscocity grade as it is specced in various types of machinery, eg,
An EP 00 is a very light semi-fluid grease. A lot of blenders will make some greases in that viscocity grade as it is specced in various types of machinery, eg,
RandyT
Elite Member
00 grease is usually referred to as Snapper grease in the mower repair business. Used in the old rear end Snapper chain cases. The peerless transaxles normally used either 80W90 or Bentonite grease.
Seven Gables
Platinum Member
- Joined
- Jan 30, 2019
- Messages
- 600
- Location
- Northern lower Michigan
- Tractor
- jd 5115m , Ford 545D, Kubota M8540, NH t4.105 , Ford 5030, Ford 4830, NH TN 95FA, Volvo EC60E
Its always on the shelf at my TSC
