Farmi w60

   / Farmi w60 #1  

whatscooking

New member
Joined
Mar 19, 2012
Messages
17
Location
Madison,In
Tractor
JD 2955
Good day everyone. Can somebody tell me how many feet of cable, 1/2 inch, the Farmi has. I see some wild figures on the net.
 
   / Farmi w60 #2  
Never seen or heard of a question like this??
You are telling nothing
what's a Farmi?
what cable? what's it for?
What kind of cable? control cables, lifting/hoist cables, armored cables,


willy
 
   / Farmi w60 #3  
Good day everyone. Can somebody tell me how many feet of cable, 1/2 inch, the Farmi has. I see some wild figures on the net.
I believe that would have about 165 feet of cable.
 
   / Farmi w60
  • Thread Starter
#5  
Never seen or heard of a question like this??
You are telling nothing
what's a Farmi?
what cable? what's it for?
What kind of cable? control cables, lifting/hoist cables, armored cables,


willy

The Farmi W60 is A three point log winch for the back of you tractor depending on the size of your tractor. I believe it has A 1/2 pulling cable but I didn't know the length. They offer A synthetic cable but I don't think I will consider that.
I have done alot of reading and have been considering A Wallenstein FX 140. It has A little more pulling power and A trailer hitch but what's even better I can get one delivered with A directional snatchblock for over $2000.00 less.
 
   / Farmi w60 #6  
When I was in the market it seemed like all the winches came with 50 meters of cable, 50 meters is about 165 feet. I rarely use more than 50' but having another 100'+ on hand is a good thing.
 
   / Farmi w60 #7  
Thank you for the information I didn't know what it was.

If you need any cable this company has it for:

1/2 x 165' Cable w/Ferrule​

$209.53

willy
 
   / Farmi w60 #8  
I have a new Wallenstein FX140 that will be used with a NH 110 Power Star. The tractor has a loader so it is a big rig in the woods. I need to mount a skid plate or two under the tractor to protect the hoses, wires, etc. and plan to build some sweeps. What tractor will you be using with your winch?
 
   / Farmi w60
  • Thread Starter
#9  
I have a new Wallenstein FX140 that will be used with a NH 110 Power Star. The tractor has a loader so it is a big rig in the woods. I need to mount a skid plate or two under the tractor to protect the hoses, wires, etc. and plan to build some sweeps. What tractor will you be using with your winch?

A JD 2955, 98 horse.
What do you think of your Wallenstein? I was really sold on A Farmi but then I got to pricing and comparing and the FX 140 Wallenstein seems like A good deal.
 
   / Farmi w60 #11  
Don't forget to include a self releasing snatch block. In my hilly tight forest it is a lifesaver.

If you have occasion to completely spool out all the cable, grab a can of bright spray paint. I painted a portion of my cable to let me know when I was getting to the end. I left 10' unpainted, and then painted about 10. When I see the painted cable I know I better be close, and when the unpainted part shows up after that I better be choking up a log.

Doug in SW IA
 
   / Farmi w60
  • Thread Starter
#12  
Got the Wallenstein FX 140 ordered, with the self releasing snatchblock and A chainsaw scabbard. Since they have to order from the factory I asked for A green winch.
That sounds like A good idea painting the cable.
 
Last edited:
   / Farmi w60 #13  
I have that same winch. I bet that farmi is stouter than the FX140 because that W60 has a bigger sprocket on the winch. That farmi is high though. Can tell you all about the FX140.
 
Last edited:

Marketplace Items

2007 FREIGHTLINER M2 26FT BOX TRUCK (A59905)
2007 FREIGHTLINER...
PALLET OF (3) CABINETS (A60432)
PALLET OF (3)...
17102 (A56859)
17102 (A56859)
Case Axial-Flow Combine Wheels NO RESERVE (A61307)
Case Axial-Flow...
2008 V.E. ENTERPRISES 130BBL VAC TRAILER (A58214)
2008 V.E...
RIPPER ATTACHMENT FOR MINI EXCAVATOR (A58214)
RIPPER ATTACHMENT...
 
Top